Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > Technical > Non Starting i6 |
|
|
MotionInc Member Since: 17 Jun 2019 Location: North America Posts: 1298 |
Have a look at this thread and check to make sure no connections are loose or dislodged in the passenger footwell behind the glove box.
|
||
7th Oct 2021 5:15 pm |
|
Mostly Harmless Member Since: 07 Dec 2017 Location: East Yorkshire Posts: 31 |
OK, so more time tonight trying to figure this out.
|
||
7th Oct 2021 6:49 pm |
|
Mostly Harmless Member Since: 07 Dec 2017 Location: East Yorkshire Posts: 31 |
Ok, so the nanocom doesnt tell me anything i dont already know.
|
||
15th Oct 2021 3:42 pm |
|
p_gill Member Since: 06 Dec 2011 Location: USA Posts: 1219 |
Did you do this?
|
||||
15th Oct 2021 4:59 pm |
|
p_gill Member Since: 06 Dec 2011 Location: USA Posts: 1219 |
Did you check these connectors? Are they disconnected?
|
||||||
15th Oct 2021 5:46 pm |
|
p_gill Member Since: 06 Dec 2011 Location: USA Posts: 1219 |
This is for the Diesel but it is worth a look.
|
||
15th Oct 2021 6:02 pm |
|
p_gill Member Since: 06 Dec 2011 Location: USA Posts: 1219 |
[quote="Mostly Harmless"]
What does it show on the Dashboard when you switch to Neutral? P......R......N or E If the fuse for the transmission control module is broken then you will get an E and a no start Good luck Paul Last edited by p_gill on 15th Oct 2021 10:24 pm. Edited 1 time in total |
||
15th Oct 2021 7:02 pm |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 4583 |
Would a hard reset be worth trying ?
|
||
15th Oct 2021 9:37 pm |
|
Mostly Harmless Member Since: 07 Dec 2017 Location: East Yorkshire Posts: 31 |
Ok, thanks for the suggestions.
|
||
16th Oct 2021 12:03 pm |
|
Mostly Harmless Member Since: 07 Dec 2017 Location: East Yorkshire Posts: 31 |
57 SE i6 |
||
16th Oct 2021 12:07 pm |
|
Boxbrownie Member Since: 17 Mar 2019 Location: Looe Posts: 2053 |
Even when mine didn’t start it had messages (or at least symbols) in the LCD displays…..yours are dead……I know it’s a long shot but maybe the loom to the cluster has a bad connection? It might stop the vehicle from going further as it runs the checks….best of luck matey. Regards
|
||
16th Oct 2021 12:47 pm |
|
MotionInc Member Since: 17 Jun 2019 Location: North America Posts: 1298 |
@Mostly Harmless, did you check the three connections in the passenger footwell behind the glovebox? Many passenger feet have been know to kick them loose. |
||||||
16th Oct 2021 1:40 pm |
|
Mostly Harmless Member Since: 07 Dec 2017 Location: East Yorkshire Posts: 31 |
Yes, checked and all good 57 SE i6 |
||
16th Oct 2021 3:22 pm |
|
MotionInc Member Since: 17 Jun 2019 Location: North America Posts: 1298 |
Well, if the recurring error code is the crash mode status, then you will need to get to a LR dealer or the JLR SDD programmer and software if the GAP tool won't cut it. |
||
16th Oct 2021 4:17 pm |
|
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis