I was looking at the magnetic protection covers that Bjartin has, Which i priced up as (650 euros) and that got me thinking i could make my own, possibley anyway






I found a site that offers a 10m roll of vehicle grade magnetic sheet 610mm wide 0.85mm thick

Only problem is I would have to work out how much i would need first, as i presume the doors are larger than 610mm, and the site seems to offer gloss white only. (I would prefer grey obviously)

Just thinking out loud at the moment, but has anybody had dealing with magnetic vehicle signs and how flexible are these to mold around the curves of the wheel archs etc Former Mod/Member, with the most post & Chicken George Arch nemesis

Last edited by npinks on 3rd Nov 2008 5:56 pm. Edited 1 time in total

NP you have way too much time on your hands

go on make it ....so we can have a good laugh At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

Well just sent a email to see if a company can send me a sample of the magnetic sheet to see if it's suitable

Anybody got the Front Wing, door sizes and rear wing sizes so i don't have to measure my car  Former Mod/Member, with the most post & Chicken George Arch nemesis

Got a template now, thanks to our very own forum gallery

Click image to enlarge

chicken george wrote:

go on make it ....so we can have a good laugh

You wouldn't want one for your FL2 Dogging car, might make cleaning the Jz off the doors easier though  Former Mod/Member, with the most post & Chicken George Arch nemesis

Oops I think we upset the mod, ah well there a first time for everything

You'd better measure your car Mr pink not those drawings or your plan to convert your fl2 in a fridge will go wrong.

If by some crazy chance it does work I will be sure to buy a big bag of alphabet fridge magnets to write rude messages on your car with  At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

not upset me at all CG ,

it just a work in progess an idea of somesorts, one of many that flows through my head  Former Mod/Member, with the most post & Chicken George Arch nemesis

aS LONG AS YOUR FRIDGE MAGNETS SPELL

F R E E L 2 . C O M

i WON'T MIND Former Mod/Member, with the most post & Chicken George Arch nemesis

caps lock

I think your idea would work but I would stick to covering the large flat areas rather than trying to cover the more awkward areas At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

it works for the kit Bjartin has got from Protec

www.protec-magnet.com

Obviously my DIY idea would be doing the same thing as theres but differently  Former Mod/Member, with the most post & Chicken George Arch nemesis

the most likely result

Click image to enlarge

thanks for the faith in me young chicken farmer  Former Mod/Member, with the most post & Chicken George Arch nemesis

As a non-owner (extended test drive tomorrow) I hesitate to comment, but would this help:
http://www.landrover.co.uk/Microsites/FL2G..._exterior@

Bill

Last edited by wdw on 31st Oct 2008 11:31 pm. Edited 1 time in total