Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > Apple CarPlay 2014MY - Almost Working
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
sobrinho



Member Since: 22 Jul 2019
Location: Brazil
Posts: 96

Brazil 2014 Freelander 2 SD4 HSE Auto Fuji White
Apple CarPlay 2014MY - Almost Working

In short, our car runs WinCE and Autolink Kit have a WinCE app to use with the dongle.




Brazil Freelander 2 contains an SD Card under the passenger's seat which can be read by any computer.

It runs an Igo Primo GPS and you can replace the SD Card with another one with contains a file named navi.exe which will be executed when you hit Nav in the screen.

So far I have the app working and the dongle in hand but the USB port only allows 500ma while the Carlink dongle requires 1amp.


I'm going to buy or make a powered USB cable tomorrow and see what happens.

Here is a few pictures of what I found so far playing around with the car, I could even run the notepad in the screen Rolling with laughter


PS: At least one UK fellow reported that their version does not use an SD Card and does not have the same module as mine, not sure about other places.

Post #396861 10th Sep 2020 11:39 pm
View user's profile Send private message View poster's gallery Reply with quote
sobrinho



Member Since: 22 Jul 2019
Location: Brazil
Posts: 96

Brazil 2014 Freelander 2 SD4 HSE Auto Fuji White

Some of the screens I have no idea how I went to them, especially the testing one.

Post #396862 10th Sep 2020 11:41 pm
View user's profile Send private message View poster's gallery Reply with quote
sobrinho



Member Since: 22 Jul 2019
Location: Brazil
Posts: 96

Brazil 2014 Freelander 2 SD4 HSE Auto Fuji White

The Carplay WinCE app does open and responds to the touch.

Although the USB dongle requires at least 1amp and when it tries to start the Carplay on iPhone, the iPhone reports that something didn't work.

Probably because of the low amperage available, now I'm going to try to build a energized USB cable to have enough energy for the dongle but still connected to the car, wish me lucky.


Post #396984 13th Sep 2020 4:56 pm
View user's profile Send private message View poster's gallery Reply with quote
sobrinho



Member Since: 22 Jul 2019
Location: Brazil
Posts: 96

Brazil 2014 Freelander 2 SD4 HSE Auto Fuji White

The energized cable made no difference, I'm guessing that the app is unable to find the USB dongle.

I'm going to try to contact the Carlinkit support, if anyone has any idea of how to check if the car computer is being able to connect to the USB, it would be helpful.

It is working because I can listen to my iPhone music using the USB port, something is going on with the Chinese carplay application.

Here some pictures of the app running and from the module we have under the passenger's seat.












Post #396986 13th Sep 2020 8:29 pm
View user's profile Send private message View poster's gallery Reply with quote
sobrinho



Member Since: 22 Jul 2019
Location: Brazil
Posts: 96

Brazil 2014 Freelander 2 SD4 HSE Auto Fuji White

Seems like my dongle is faulty, it is not working in the WinCE emulator either but I'm not sure if it should.

When the dongle is connected to a Windows machine it keeps appearing and disapperiang from the "devices control center" of Windows.

Looks like it is stuck in a loop trying to boot or something.


I remember it worked in an Android running on RPI3 but I no longer have it.

Waiting for a new one to arrive and I will keep this updated.

Post #397002 14th Sep 2020 3:46 pm
View user's profile Send private message View poster's gallery Reply with quote
sobrinho



Member Since: 22 Jul 2019
Location: Brazil
Posts: 96

Brazil 2014 Freelander 2 SD4 HSE Auto Fuji White

Today I managed to get the control panel and explorer to run but apparently I can't see my USB device connected to the car, not sure if that means I can't access the USB port from the GPS yet.




Post #397122 18th Sep 2020 12:27 am
View user's profile Send private message View poster's gallery Reply with quote
Vanny



Member Since: 06 Dec 2015
Location: Cheshire
Posts: 436

United Kingdom 2013 Freelander 2 SD4 XS Auto Santorini Black

Okay, well, you've piqued my interest enough that I've bought a 10E887 module!

Looking at the wiring harness (L405) there is no data link between the IAM and 'ASIA' Nav Unit. The only communication method is the medium speed CANBus which can't sustain USB data connection. Plugging the dongle into the cars USB ports wont affect the ASIA Nav Module.

So I opened up the module. There are a hand full of JTAG programming headers (red), but more critically, there is a USB connector INSIDE the case (green). A quick cut should make the connector accessible in the car.







I'd be really interested to know where you get the "iGO Primo" software from, my unit didn't come with the SD Card.

Post #397231 20th Sep 2020 8:15 pm
View user's profile Send private message View poster's gallery Reply with quote
sobrinho



Member Since: 22 Jul 2019
Location: Brazil
Posts: 96

Brazil 2014 Freelander 2 SD4 HSE Auto Fuji White

Vanny,

What do we know about the audio between this module and the car?

The GPS itself does not have anything critical but if we make carplay work for instance, how would the audio connection be made? Would it support full quality to play the surround system?

Post #397249 21st Sep 2020 12:37 pm
View user's profile Send private message View poster's gallery Reply with quote
sobrinho



Member Since: 22 Jul 2019
Location: Brazil
Posts: 96

Brazil 2014 Freelander 2 SD4 HSE Auto Fuji White

I managed to run https://www.android-x86.org in an old computer here to make sure that the dongle is working and it is.

Click image to enlarge


Next step: remove the module from the car and try to use its USB port.

Post #397287 22nd Sep 2020 5:29 pm
View user's profile Send private message View poster's gallery Reply with quote
sobrinho



Member Since: 22 Jul 2019
Location: Brazil
Posts: 96

Brazil 2014 Freelander 2 SD4 HSE Auto Fuji White

Update: The GPS module acts as a slave USB device and not master, meaning that we can connect to the module but the module can't connect to the dongle (or a pen drive, for instance).

There is a small switch that exposes the module as one device to my notebook and doesn't boot in the car and the other way around it identifies as another device and does boot.

The USB port doesn't have any voltage but even using a powered USB cable does not make it work because of the master/slave thing.







Vanny, looks like you bought the right module, board looks exactly the same.


 Freelander 2 2014 SD4 Automatic HSE Fuji White
CarPlay - WIP

Post #397462 25th Sep 2020 6:14 pm
View user's profile Send private message View poster's gallery Reply with quote
Vanny



Member Since: 06 Dec 2015
Location: Cheshire
Posts: 436

United Kingdom 2013 Freelander 2 SD4 XS Auto Santorini Black

I wonder if it needs a USB OTG (on the go) adapter. I wouldn't be surprised if there is a way to get the board to supply power to the port, or perhaps a hidden port (maybe one of the highlighted connectors).

Post #397464 25th Sep 2020 6:29 pm
View user's profile Send private message View poster's gallery Reply with quote
sobrinho



Member Since: 22 Jul 2019
Location: Brazil
Posts: 96

Brazil 2014 Freelander 2 SD4 HSE Auto Fuji White

OTG made no difference even powering the device externally.

Any other tries? There is any way to check if any of those ports are in fact an USB port? Freelander 2 2014 SD4 Automatic HSE Fuji White
CarPlay - WIP

Post #397469 25th Sep 2020 8:02 pm
View user's profile Send private message View poster's gallery Reply with quote
sobrinho



Member Since: 22 Jul 2019
Location: Brazil
Posts: 96

Brazil 2014 Freelander 2 SD4 HSE Auto Fuji White

FWIW.
 Freelander 2 2014 SD4 Automatic HSE Fuji White
CarPlay - WIP

Post #397472 25th Sep 2020 9:20 pm
View user's profile Send private message View poster's gallery Reply with quote
sobrinho



Member Since: 22 Jul 2019
Location: Brazil
Posts: 96

Brazil 2014 Freelander 2 SD4 HSE Auto Fuji White

Hey there!

Wondering to restart this project. Any news, @Vanny? Freelander 2 2014 SD4 Automatic HSE Fuji White
CarPlay - WIP

Post #420897 2nd May 2022 2:40 pm
View user's profile Send private message View poster's gallery Reply with quote
Vanny



Member Since: 06 Dec 2015
Location: Cheshire
Posts: 436

United Kingdom 2013 Freelander 2 SD4 XS Auto Santorini Black

Unfortunately, I've never even got the module plugged in. Far to busy with paid work to tinker these days Sad

Post #421263 15th May 2022 9:03 am
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site