Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > United Kingdom > Freelander 2 won't crank.
Post Reply  Down to end
Page 4 of 4 <1234
Print this entire topic · 
MotionInc



Member Since: 17 Jun 2019
Location: North America
Posts: 764

Canada 2008 LR2 i6 SE Auto Tambora Flame

D1GG3R wrote:
So after much deliberation, I ordered the steering lock emulator.
I thought it worth a try at about £20 delivered.

I've just plugged it in, as per previous posted video, and boom... Off she went. Fired up first push of the button 👍

Now, I see this as no permanent fix. I would much rather have a new steering lock.

If I were to buy a new or used steering lock, will it need coding to the car??

Could be wrong here but I remember reading that it will have to be coded to the ECU/BCU

Post #396101 25th Aug 2020 1:59 am
View user's profile Send private message View poster's gallery Reply with quote
D1GG3R



Member Since: 19 Aug 2020
Location: North West
Posts: 26

United Kingdom 2007 Freelander 2 TD4 XS Manual Stornoway Grey

It would seem so. 👍
At £229 for a brand new one, I think thats the way forward.

Next is the key fob that keeps ejecting.

Just out of interest. Is there anyone near Warrington that can do the coding thing??

Post #396120 25th Aug 2020 11:28 am
View user's profile Send private message View poster's gallery Reply with quote
bomeo



Member Since: 30 Apr 2018
Location: Focsani
Posts: 42

Romania 2011 Freelander 2 TD4 S Manual Galway Green

Today it was raining and snowing so I had time to look at the error codes. I found it with a Delphi multi-brand tester. C1108, C1A41 codes that say that the 5V voltage, probably the one that passes through the switches on the clutch pedal is missing or is too low.
B10AC, B10A2, B10AE, these would be Start / Stop codes. Start / Stop worked when I could not start the car from the button but directly from the start relay. It doesn't work now. I will check the 5V from clutch pedal switches if not good, ground point contact.
In service manual say that after changing one of clutch switch it must be configured. This cannot be true.

Post #406284 7th Apr 2021 5:13 pm
View user's profile Send private message View poster's gallery Reply with quote
bomeo



Member Since: 30 Apr 2018
Location: Focsani
Posts: 42

Romania 2011 Freelander 2 TD4 S Manual Galway Green

Same situation, C1108 , C1A41 DTC. Motor doesn't crank. Changed clutch pedal and switches, clutch master cylinder. Cruise control dead, start stop dead. Cranks if a de press clutch and brake pedal the same time but the starter solenoid remains engaged. The only way I cand start the car is by manually press the R102 relay. I have not another ideas. Is someone here who can help ?

Post #406476 11th Apr 2021 12:05 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 4 of 4 <1234
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2021 Futuranet Ltd & Martin Lewis


Switch to Mobile site