Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > In Car Electronics > Radio interference
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
cwollen



Member Since: 14 Jan 2020
Location: east sussex
Posts: 23

United Kingdom 
Radio interference

When I put the heated window on the radio drops in volume and also crackles.

I had this on a ford sierra that used the window element as an aerial, and had to replace the aerial amp.

could this be the same ?
if so location of amp ?

Post #386723 18th Feb 2020 6:10 pm
View user's profile Send private message View poster's gallery Reply with quote
Largered



Member Since: 10 Jul 2016
Location: UK
Posts: 1978

Click image to enlarge


rear near side of loadspace.
.

Post #386729 18th Feb 2020 6:40 pm
View user's profile Send private message View poster's gallery Reply with quote
cwollen



Member Since: 14 Jan 2020
Location: east sussex
Posts: 23

United Kingdom 

thanks

will take a look

Post #386735 18th Feb 2020 7:19 pm
View user's profile Send private message View poster's gallery Reply with quote
Arese



Member Since: 09 Jan 2012
Location: Casablanca
Posts: 395

Morocco 2012 Freelander 2 TD4 HSE Auto Santorini Black

Have same issue
Starts happening just after replacing the rear windshield ...

Post #386736 18th Feb 2020 7:23 pm
View user's profile Send private message View poster's gallery Reply with quote
cwollen



Member Since: 14 Jan 2020
Location: east sussex
Posts: 23

United Kingdom 

I will update you when I find the fault, I have not checked if the heated rear screen is working (the car is new to me)

I will check that first in case the element is at fault

Post #386739 18th Feb 2020 7:39 pm
View user's profile Send private message View poster's gallery Reply with quote
Worms



Member Since: 31 Oct 2017
Location: Highlands
Posts: 635

Scotland 2010 Freelander 2 TD4_e GS Manual Zermatt Silver

Interesting! My rear wiper is starting to play-up and I get radio interference when it is stuck at half-way. At least it is giving me a warning to make sure it goes back to rest, rather than leaving it to overheat. 2005 D3 2.7 Auto
Previously:
2010 MY FL2 TD4e GS - Now gone at 199,500 miles, about 135,000 of them mine.
‘93 Defender 110 200TDi CSW
‘87 Defender 90 4 cyl Petrol
‘83 110 CSW V8 - best ever!
Range Rover 2-door V8 (not sure of year - 4-speed box and vacuum diff switch)
Series III SWB Diesel

Post #386759 19th Feb 2020 7:50 am
View user's profile Send private message View poster's gallery Reply with quote
Lightwater



Member Since: 21 Aug 2014
Location: Sydney Northern Beaches
Posts: 4704

Ukraine 2013 Freelander 2 2.0T SE Auto Fuji White

Panel clip part numbers in red text halfway down this page.

https://www.freel2.com/forum/topic33026-45.html


When you put the boot side/s trim panel back on, there is one panel clip sort of by itself in the middle. Make sure this one lines up & clips into its hole otherwise it will squeak & forever be irritating. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Post #386766 19th Feb 2020 10:36 am
View user's profile Send private message View poster's gallery Reply with quote
iansoady



Member Since: 27 Feb 2020
Location: Redditch
Posts: 35

United Kingdom 2013 Freelander 2 SD4 XS Auto Baltic Blue

Arese wrote:
Have same issue
Starts happening just after replacing the rear windshield ...


Hi there.

I have a similar problem - did you ever track down the cause? Only evident now in the cold mornings..... Ian.
2013 LR2 SD4 XS
1982 Moto Guzzi V50
1952 Norton ES2

Post #398939 26th Oct 2020 11:31 am
View user's profile Send private message View poster's gallery Reply with quote
Arese



Member Since: 09 Jan 2012
Location: Casablanca
Posts: 395

Morocco 2012 Freelander 2 TD4 HSE Auto Santorini Black

Yes I suspect a cut filament on the rear window. When I activate the rear window heater, there is a place that remains with some fog.

Post #399005 27th Oct 2020 10:03 pm
View user's profile Send private message View poster's gallery Reply with quote
ReggiePerrin



Member Since: 13 Mar 2013
Location: Derbyshire
Posts: 1241

England 2013 Freelander 2 SD4 HSE Lux Auto Firenze Red

Arese wrote:
Have same issue
Starts happening just after replacing the rear windshield ...

On my previous MY10 XS the rear screen heater always caused radio interference - it was one or the other, a perfect de-mist and no radio or radio and no de-mist. Happily, the heated mirrors did the job so the rear screen heater was rarely used.

Post #399022 28th Oct 2020 9:28 am
View user's profile Send private message View poster's gallery Reply with quote
iansoady



Member Since: 27 Feb 2020
Location: Redditch
Posts: 35

United Kingdom 2013 Freelander 2 SD4 XS Auto Baltic Blue

Arese wrote:
Yes I suspect a cut filament on the rear window. When I activate the rear window heater, there is a place that remains with some fog.


I've noticed that the lowest filament seems to be discoloured which may be causing a high resistance. Possibly repair paint may fix it. Ian.
2013 LR2 SD4 XS
1982 Moto Guzzi V50
1952 Norton ES2

Post #399023 28th Oct 2020 9:39 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site