Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > In Car Electronics > Surround Camera System Retrofit
Post Reply  Down to end
Page 6 of 6 <123456
Print this entire topic · 
Brit plumber



Member Since: 18 Jan 2019
Location: Lincolnshire
Posts: 7

United Kingdom 

At first there were no PDC overlays but I did have reverse lines and tow hitch assistance. I then remembered I hadn’t cleared the DTCs from before I test fitted a camera so once cleared, I had the overlays. I did worry that as this module originally worked on a medium speed can but interfaced with the PDC on a high speed can (L320 PDC is on the medium speed can), it wouldn’t. The only issue I have is that each camera flashes on/off 3 times before the image settles, I also have a DTC for Calibration req’d. So I reckon once I have all the cameras in place, I can carry out a rough calibration and it should be OK. Obviously a true Cal won’t work as the module is not correct for an L320 so the shut lines will be in the wrong place.

Post #366107 10th Feb 2019 3:25 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 6 of 6 <123456
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2019 Futuranet Ltd & Martin Lewis