Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > Bulb replacement on 11MY
Post Reply  Down to end
Page 5 of 5 <12345
Print this entire topic · 
ad210358



Member Since: 12 Oct 2008
Location: Here and There
Posts: 7464

England 

Just the two 10mm bolts to remove and pull the little lever at the back, not before marking where where the headlight is so it will not upset the beam height when you refit.

Post #121731 28th Nov 2011 5:20 pm
View user's profile Send private message View poster's gallery Reply with quote
JonL



Member Since: 24 Mar 2011
Location: East Yorks
Posts: 26

United Kingdom 2011 Freelander 2 SD4 GS Auto Stornoway Grey

gDallasK wrote:
I started by mounting the bulbs in the holders and then tried to clip the assembly back into the unit. WRONG!! It's much quicker and easier if you drop the bulb into the light unit and them attach the holder / connector unit.


Top tip. Far far easier this way. Get the bulb mounted properly too rather than pointing at the floor!

Post #121830 29th Nov 2011 12:19 pm
View user's profile Send private message View poster's gallery Reply with quote
GeorgeG



Member Since: 05 May 2011
Location: Dorset
Posts: 88

United Kingdom 

Just fitted Halfords + 90% bulbs, both beams, with H7's and H 11's. Have to say I am very disappointed as I cannot say I notice much of a difference compared to the originals. To cap it all, despite the fact that I marked the position of the headlight brackets before I removed them, the main beam seems very low. Anyone got any tips on how to restore the main beam height?

Post #122063 1st Dec 2011 12:49 am
View user's profile Send private message View poster's gallery Reply with quote
chicken george



Member Since: 06 Dec 2007
Location: N. Yorks
Posts: 13283

United Kingdom 2008 Freelander 2 TD4 XS Manual Santorini Black

new bulbs rarly have the same spread pattern as the old one, you should get your lights re-aligned to suit the new bulbs,
this is there are mixed reviews of these brighter bulbs, some get lucky others end up with bright bulbs pointing the wrong way At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

Post #122069 1st Dec 2011 9:18 am
View user's profile Send private message View poster's gallery Reply with quote
dunroof



Member Since: 24 Nov 2010
Location: <> Yes, still being stalked by another member!
Posts: 1785

GeorgeG, take the lights off and recheck you have them clipped into the bracket, then when you screw the bolts back in, push them back until you allign the old marks where the original bolts tightened.

Post #122072 1st Dec 2011 9:25 am
View user's profile Send private message View poster's gallery Reply with quote
chicken george



Member Since: 06 Dec 2007
Location: N. Yorks
Posts: 13283

United Kingdom 2008 Freelander 2 TD4 XS Manual Santorini Black

yes but the difference is in the bulbs themselves, source- an auto express test, they found the bulbs didn't always give a great improvement unless they where professionally re-aligned.

I repeat i got lucky and they worked fine without any extra alignment At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

Post #122086 1st Dec 2011 11:25 am
View user's profile Send private message View poster's gallery Reply with quote
RazMan



Member Since: 18 Nov 2011
Location: Essexshire
Posts: 336

United Kingdom 2012 Freelander 2 SD4 XS Auto Fuji White

GeorgeG wrote:
Just fitted Halfords + 90% bulbs, both beams, with H7's and H 11's. Have to say I am very disappointed as I cannot say I notice much of a difference compared to the originals. To cap it all, despite the fact that I marked the position of the headlight brackets before I removed them, the main beam seems very low. Anyone got any tips on how to restore the main beam height?


I made the same mistake here - BOTH my main beams were pointing only a few metres in front. I rechecked the seating of the bulbs in the reflector unit and found that the tabs were not locating properly, causing the bulb to be at a jaunty angle. Once I had discovered my mistake the beams were corrected Cheers,
Raz
FL1 TD4 GS Auto 2001 Silver
FL2 TD4 Auto 2007 Black
FL2 XS SD4 Auto 2012 Fuji White

Post #122087 1st Dec 2011 11:45 am
View user's profile Send private message View poster's gallery Reply with quote
GeorgeG



Member Since: 05 May 2011
Location: Dorset
Posts: 88

United Kingdom 

Thanks all for replies. Razman, I think you may be right. I will try re-seating the main beam bulbs.

Post #122091 1st Dec 2011 1:28 pm
View user's profile Send private message View poster's gallery Reply with quote
GeorgeG



Member Since: 05 May 2011
Location: Dorset
Posts: 88

United Kingdom 

You were right RazMan. Main beam bulbs were not located properly. Now at least they are as good as the original bulbs!

Post #122196 2nd Dec 2011 8:33 pm
View user's profile Send private message View poster's gallery Reply with quote
Tigger



Member Since: 30 Mar 2011
Location: L15KRD
Posts: 2555

United Kingdom 

GeorgeG wrote:
You were right RazMan. Main beam bulbs were not located properly. Now at least they are as good as the original bulbs!


This is very odd; mine are still performing brilliantly. When I drove the loaner from my dealer a couple of weeks ago, the standard bulbs were completely unacceptable in comparison. I wonder why we've achieved such different results?! Shocked Infact, I pulled up outside a friend's house last night, just as he was pulling up in his X Type and he commented that my headlamps seemed bright and he didn't even know that I'd changed the bulbs (and yes, they are correctly aligned!)

Post #122240 3rd Dec 2011 9:19 am
View user's profile Send private message View poster's gallery Reply with quote
chicken george



Member Since: 06 Dec 2007
Location: N. Yorks
Posts: 13283

United Kingdom 2008 Freelander 2 TD4 XS Manual Santorini Black

get the alignment checked if your not happy, as tigger says the bulbs should give a vast improvement, I moved from a xenon Audi to a halogen fl2 and regretted it until I upgraded the bulbs, still not as good as the xenons but not bad never the less.

I used the philips bulbs


RRS has halogen projectors,no level dial in the cabin, they work well I'm not thinking of changing the bulbs (yet - more is always better) At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

Post #122257 3rd Dec 2011 11:24 am
View user's profile Send private message View poster's gallery Reply with quote
gDallasK



Member Since: 19 Apr 2011
Location: Off the map
Posts: 51

United Kingdom 2014 Freelander 2 SD4 XS Auto Santorini Black

mcphersonstrut wrote:
LED's are + and - sensitive so before you put them in the bin try rotating them through 180 degs Thumbs Up


Thanks Mcphersonstrut! Turning the bulbs through 180 degrees solved the problem - and I now have nice bright white LED sidelights!

Regards,

Geoff The map is not the territory

2011 TD4 GS Manual - Gone
2014 SD4 XS Auto - Gone
2018 Jaguar E-Pace R-Dynamic 180 AWD

Post #123222 10th Dec 2011 7:23 pm
View user's profile Send private message View poster's gallery Reply with quote
mcphersonstrut



Member Since: 21 Jul 2009
Location: In the land of 2 wheel drive and 60mpg
Posts: 2164

England 2008 Freelander 2 TD4 HSE Auto Stornoway Grey

Thumbs Up

Post #123223 10th Dec 2011 7:31 pm
View user's profile Send private message View poster's gallery Reply with quote
Nazca Sand Eddie



Member Since: 06 Nov 2007
Location: Devon
Posts: 179

United Kingdom 

Having recently read all the above posts relating to whether its H7 or H11, I can offer the following:-

I have a MY11 SD4 GS, with projector lamps, put together in May 2011.

I was standing in front of the car and noticed some raised letters moulded on the base of the headlamp units.

Under the dipped beams is H11, and under the main beams is H7.

So now I know for certain the correct replacements (despite my handbook stating different facts) for my car.

Post #123646 15th Dec 2011 5:07 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 5 of 5 <12345
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site