I have just had this on our 60 plate HSE, pre facelift, I have changed the oil and reset the service meter and still have the "Dealer service required" will ring the indy that serviced her @ 8000 miles ago on Monday.................car is on 82k

This works for me

Oil Service Reset

found this on another site and it was the same procedure I used. took more like 1 min to reset rather than the 15 seconds for this guy

To switch off the service light in your MK6 or MK7 Transit: (worked for FL2 MY11 TD4)

1. Service it
2. Switch on ignition but don't start engine
3. Press Down Brake pedal and Throttle pedal fully, and hold till service light flashes this may take up to a minute, but usually about 15 seconds
4. Switch off igniton

Job Done

It is all in here -
http://www.freel2.com/forum/post299054.html#299054
http://www.freel2.com/forum/post56312.html#56312
http://www.freel2.com/forum/post46484.html#46484

Or borrow IID tool or Carsoft LR2. G4 Freelander 2005 V6 HSE Stage 1 Thailand/Laos. HQ Support YZT
Grey Freelander 2 2011 SD4 HSE - Works Van - gone to a new home.

grod wrote:

This works for me

Oil Service Reset

found this on another site and it was the same procedure I used. took more like 1 min to reset rather than the 15 seconds for this guy

To switch off the service light in your MK6 or MK7 Transit: (worked for FL2 MY11 TD4)

1. Service it
2. Switch on ignition but don't start engine
3. Press Down Brake pedal and Throttle pedal fully, and hold till service light flashes this may take up to a minute, but usually about 15 seconds
4. Switch off igniton

Job Done

It works thank you Grod

Took @ minute

Saved me a visit to the Indy

It would be worth making This thread or the different reset methods a sticky for others in future maybe

Well guess what - it already is !
http://www.freel2.com/forum/topic13888.html G4 Freelander 2005 V6 HSE Stage 1 Thailand/Laos. HQ Support YZT
Grey Freelander 2 2011 SD4 HSE - Works Van - gone to a new home.

My apologies

fadig wrote:

Brazilian tip:

1. Turn on the ignition switch
2. Open the hood
3. Open the driver door
4. Note: Manintenance resetting information is not displayed on the instrument cluster. Fully depress the accelerator pedal, and brake pedal, and hold for 60s.
5. Turn off the ignition switch
6. Turn on the igntion switch and check whether manintenance information is cleared
7. If maintenance information is not cleared, repeat the procedure.

Just used the Brazilian move and it seems the "Service needed in X days" message has cleared OK on my MY13 as I thought it only worked on pre MY13 cars. Great but what I am not sure of is what has happened to the DPF regen cycle messaging, anyone aware if it resets that as well ?

If not anyone know of a cheap bit of kit to reset the DPF as well as service time messages.

Millers Oil currently winging its way up North again from Opie (used the FREEL2 discount code) so hopefully will get new filter and oil into her later this week. Last filter change was done at Indie to also clear message but I now own a shiny new 27 mill ratshit spanner so going to give it a go.

Millers Oils XF Longlife C1 5w-30 Fully synthetic low SAPS engine oil - 5 Litres x 2 Price: delivered £57.59. FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

Oil service light just do the Brazilian tip it works all cleared

Still not sure if it going to clear the DPF count on later cars doing the Brazilian war dance. Will have to see how it goes. FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

2013> will need to be plugged into diagnostic to clear (oil service)

Last edited by Jack frost on 4th Oct 2017 2:36 pm. Edited 1 time in total

Just cleared the annual service reminder using the Brazilian War Dance though on the MY13. We will see. FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current

sid wrote:

fadig wrote:

Brazilian tip:

1. Turn on the ignition switch
2. Open the hood
3. Open the driver door
4. Note: Manintenance resetting information is not displayed on the instrument cluster. Fully depress the accelerator pedal, and brake pedal, and hold for 60s.
5. Turn off the ignition switch
6. Turn on the igntion switch and check whether manintenance information is cleared
7. If maintenance information is not cleared, repeat the procedure.

fantastico

Try it and find out next time you get a message. FL2 MY10 TD4 GS traded in at 2 years
FL2 MY13 TD4 GS Current