For the experienced this must be a numpty question but could someone explain/confirm what the stage 2 instruction means?

Tighten bolt.

Stage 1: Torque 140Nm
Stage 2: 45°

I found this on a web search and wonder if I need one of these to add an extra turn after setting the torque. It's a lower suspension arm bolt.


 Freelander 2 2010 [MY2011] FA 2.2 TD4 XS

There are no numpty questios, we all do something for the first time.

As you suspect you torque it to the Nm setting, then add half of a quarter of a turn.

You can also buy an angular torque wrench, but I've never done so. This is not a recommendation, I'm sure the tool is made for good reason. MY11 SD4 SE Auto

45 ° is easy to gauge with your eye, as said above.
You only need the ° dial gauge when the bolt torque has more than 1 angle to measure, like the cylinder head bolts.  Hyundai Ioniq 5 Ultimate. The family car.
2009 Rimini Red SE TD4. Gone.
2006 Tonga Green i6 HSE. Gone.
Audi A5 convertible, the daily driver.
1972 Hillman Avenger GT, the project.

Thanks guys.  Freelander 2 2010 [MY2011] FA 2.2 TD4 XS