Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > General > My FL2 started to rattle and then it just stopped altogether
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Madon37s



Member Since: 11 Mar 2021
Location: Shropshire
Posts: 28

United Kingdom 2009 Freelander 2 TD4 HSE Auto Zermatt Silver
My FL2 started to rattle and then it just stopped altogether

Hi All,

I would appreciate some help with this problem if possible.

I was driving home the other day when not far from home I heard a awful rattling sound from the engine... As I was not far from home I thought I'd just make it back but just less than a mile from home the car engine stopped completely, I lost power steering but was able to roll the car over away from the traffic.

The recovery truck came and the mechanic tried to start the engine again but there was no sign of life except for a click. After getting the car back home I looked at the battery positive terminal where the power cable goes straight to the starter motor and that was blown (see picture below)







After speaking to a mate that knows someone who is a mechanic and works on more modern cars he advised me to replace the starter motor and that power cable to the starter motor.

Unfortunately, that hasn't worked because when I went to start the engine after replacing these two items the car just gave ba big cluncking sound (starter motor trying to start the engine) and nothing else happened......

The mechanic is really baffled by this because he says the FL2 engine hardly ever fails so is a bit stumped as to what is wrong...


Please HELP!!



[/img] Kind regards.

Paul

Post #414725 18th Nov 2021 12:21 pm
View user's profile Send private message View poster's gallery Reply with quote
dondiddy



Member Since: 16 Apr 2017
Location: Hamilton
Posts: 753

United Kingdom 2012 Freelander 2 TD4 HSE Manual Firenze Red

Sounds like the engine has seized or the timing belt has broken. The starter cable has failed due to excessive current draw caused by the starter trying to turn over a seized engine. (it is designed to "blow" at the point it has) You would have to confirm/eliminate this by trying to turn the engine over by hand with a socket on the crankshaft or by removing the starter then trying to turn the flywheel with a screwdriver on the ring gear teeth. If you drop the oil out the car you might find metal fragments in the oil if something terminal has happened! Good luck!

Post #414727 18th Nov 2021 1:02 pm
View user's profile Send private message View poster's gallery Reply with quote
Madon37s



Member Since: 11 Mar 2021
Location: Shropshire
Posts: 28

United Kingdom 2009 Freelander 2 TD4 HSE Auto Zermatt Silver

Hi,

Thanks for your reply.

Forgot to say the cambelt had been changed at 77000 miles by a LR garage so I can't see that happening but you never know I suppose.....



I've got my mates mechanic to come and look at it soon I hope but I'm not holding my breath for a good outcome TBH....

I was hoping that I may get a bit of a heads up as to what it might be by asking the question on here. Kind regards.

Paul

Post #414728 18th Nov 2021 1:15 pm
View user's profile Send private message View poster's gallery Reply with quote
GlynnB



Member Since: 20 Feb 2012
Location: South Yorkshire
Posts: 127

England 2009 Freelander 2 TD4 HSE Auto Zermatt Silver

Possible inlet flap gone into engine? Silver 2009 HSE

Post #414734 18th Nov 2021 3:40 pm
View user's profile Send private message View poster's gallery Reply with quote
Madon37s



Member Since: 11 Mar 2021
Location: Shropshire
Posts: 28

United Kingdom 2009 Freelander 2 TD4 HSE Auto Zermatt Silver

Sorry, but I have no idea what that is.... Kind regards.

Paul

Post #414739 18th Nov 2021 5:10 pm
View user's profile Send private message View poster's gallery Reply with quote
Grimdog



Member Since: 08 Sep 2020
Location: Wakefield
Posts: 311

United Kingdom 2010 Freelander 2 TD4_e HSE Manual Barolo Black

Lots of information on here, search swirl flaps. Good luck Thumbs Up

Post #414742 18th Nov 2021 6:11 pm
View user's profile Send private message View poster's gallery Reply with quote
Luke G



Member Since: 26 Jan 2019
Location: Australia
Posts: 87

2010 Freelander 2 TD4 HSE Auto Narvik Black

The same thing happened when a lost nut got sucked into the engine on my car. I found the nut on top of one of the pistons when I took the head off. The fuseable link to the starter motor had also blown like yours has. I’m guessing that in your case something has been sucked into the motor and would back the swirl flaps theory suggested.

Post #414748 18th Nov 2021 8:09 pm
View user's profile Send private message View poster's gallery Reply with quote
Madon37s



Member Since: 11 Mar 2021
Location: Shropshire
Posts: 28

United Kingdom 2009 Freelander 2 TD4 HSE Auto Zermatt Silver

Thanks for all the suggestions guys.

The car is going to a LR specialist garage today and they will do a diagnostic check on it to see what that throws up although I'm not holding out much hope that it'll be an easy (or cheap) fix!

I've been looking online for prices of reconditioned engines etc and it is scaring the life out of me....

I should have kept my Toyota Rav4 methinks....... Kind regards.

Paul

Post #414927 23rd Nov 2021 9:22 am
View user's profile Send private message View poster's gallery Reply with quote
Kage



Member Since: 03 Oct 2018
Location: Midlands
Posts: 223

Just curious. Which specialist have you gone to?

Post #414937 23rd Nov 2021 2:25 pm
View user's profile Send private message View poster's gallery Reply with quote
Madon37s



Member Since: 11 Mar 2021
Location: Shropshire
Posts: 28

United Kingdom 2009 Freelander 2 TD4 HSE Auto Zermatt Silver

Salop 4 X 4

Apparently the timing belt had slipped off the teeth on the pulley which is basically the same as snapping....

I'm still struggling in my head about what I'm going to do with the car if I'm honest as the prices that have been given me is just far more than I had envisaged....... Kind regards.

Paul

Post #414978 24th Nov 2021 12:33 pm
View user's profile Send private message View poster's gallery Reply with quote
AJ918



Member Since: 26 Mar 2018
Location: North West
Posts: 260

United Kingdom 2014 Freelander 2 TD4 GS Auto Santorini Black

Sorry to hear that I am not sure what your being quoted, but if it was me my first step would be to remove the cylinder head and assertain exactly the extend of the internal damage before deciding the best course of action. It may just have bent the valves, or it may have damaged the pistons as well depends on the engine speed at the time of the failure, however, trying to start the vehicle after it stopped may have caused further damage.

Post #414982 24th Nov 2021 1:45 pm
View user's profile Send private message View poster's gallery Reply with quote
Nodge68



Member Since: 15 Jul 2020
Location: Newquay
Posts: 1825

United Kingdom 2009 Freelander 2 TD4 SE Manual Rimini Red

It's not the end of the world.
Head off, replace bent valves, head back on, fit new timing belt assembly, job done.
It's a good few hours work (it took me about 15 hours to replace my damaged head earlier this month), which any decent garage should be able to do. It doesn't need to be an LR garage, as the engine is from PSA. Thumbs Up 2009 Rimini Red SE TD4. Soon to be sold.
Hyundai Ionic 5 Ultimate on order.
Gone. 2006 Tonga Green i6 HSE.

Post #415000 24th Nov 2021 6:19 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site