Hi All,

So last weekend I installed my dash-cam and hardwired it in! Lovely-Jubbly! However when reconnecting the hydraulic dampener for the glove box the clip connecting it to the body of the car broke off!n

I am at a total loss where to find this part as it has snapped in half, gluing it back together has not worked due to the pressure the clip is put under by the hydraulic arm.

The dampener itself seems to be intact, it is simply the clip that has broken! Pictures to follow.

I have really searched and cannot find a post anywhere regarding this issue, some have noted the dampener breaking but not the clip to the body.

If anyone has encountered this or knows the part number please give me a shout.

Can you identify which part it is and I can tell you the number?

I had this happen a couple of Freelanders ago and part of the plastic clip broke off, I can't find a picture of what I did but I fixed it using a cable tie and since the part is hidden it doesn't matter what it looks like. 3 x FL1 2 manual + 1 auto
5 x FL2 4 manual + 1 auto
Now Discovery Sport P250 MHEV SE

Don't waste your money on a new one. The cable tie trick is the solution.

Drill a small hole through the pin/shaft part at the top of the damper, where it goes through the flange section on the glovebox. Feed a small cable tie through the hole and zip it.

This will stop the pin/shaft from pulling out.

If you can't picture it in your mind, I could take a photo tomorrow maybe. 2008 Freelander 2 HSE Si6 Black/Black - Hers
2009 Jaguar XKR 4.2 S/C Portfolio
2005 Jaguar XJR 4.2 S/C Black/Cranberry
2005 Jaguar X-Type 3.0L AWD - Gone

Thanks guys!

Photo as promised -



You can clearly see the broken clip above. I have now also noticed that the clip for the dampener is indeed also broken at the top so I will try the cable tie trick and let you know on that one, the funny thing is I didn't even apply that much force to the glove-box.

Rich P - as above unfortunately I don't think the part is listed unless it comes with the dampener itself (Part <404C26 on the diagram).

Any suggestions for this would be great!

Many Thanks!

I broke mine a while ago only cost a few £ for a new one, I think it was less that £2 but not sure now.
It's called the glove box door damper.

Richard FL2 07 TD4 GS Auto
Ex 02 TD4 Auto

Last edited by seagull1 on 25th Jan 2016 10:45 pm. Edited 1 time in total

Hi Richard,

Can you let me know where you purchased the replacement? A link would be perfect!

Thanks!

Stratstone Tottle Rd Notts. NG2 1RT. 01159578000

Richard

PS. before you all have ago at me I have not had bad service from them, they know that I will do most of the work myself and do not seem to have a problem with that  FL2 07 TD4 GS Auto
Ex 02 TD4 Auto

They are probably relieved!

For future reference, most parts can be found here: http://cat.lrparts.ru unless you can speak Russian make sure you choose the English option!

They are good at making a simple job expensive

Richard FL2 07 TD4 GS Auto
Ex 02 TD4 Auto

Can someone give me the part No. of the hydraulic strut that helps support the Glove box as I accidentally broke it when trying to make a connection to the glove-box fuse holder, which I'm glad to say worked.

This post has been edited by the site administration team - merged into existing thread