![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > For Sale & Wanted > Front spats for sale |
![]() ![]() |
|
|
lad Member Since: 26 Nov 2009 Location: Blackburn Posts: 129 ![]() ![]() |
Aye good point in removing them if going off road. Hhhhmmmm dunno, I will have to see one with them fitted I think |
||
![]() |
|
stownrow Member Since: 12 Mar 2010 Location: Harlow Posts: 461 ![]() ![]() ![]() |
Hello! I personally drilled a hole for the lug in my bumper.... wasn't too bad! (its there for a reason after all!) We drilled a small 1mm hold through the lug and on to the bumper to get the perfect positioning. ![]() then drilled out with an 8mm drill bit. ![]() then drilled a small pilot hole for the extra screw on the end and put in black self tappers. hope this helps! :thumbsup: Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated ![]() ![]() |
||
![]() |
|
wizking Member Since: 18 Mar 2010 Location: Around Posts: 1848 ![]() ![]() ![]() |
Yes, very helpful thanks. Did you have to remove screws first as there isn't anything in my bumper screw holes? |
||
![]() |
|
stownrow Member Since: 12 Mar 2010 Location: Harlow Posts: 461 ![]() ![]() ![]() |
should be 2 original fixing in each side ? I just unscrewed these then screwed it back in with the spat attached? ![]() |
||
![]() |
|
wizking Member Since: 18 Mar 2010 Location: Around Posts: 1848 ![]() ![]() ![]() |
ok, thanks. Looks like the dealers forgot to put these screws back in then after it went in for the parking sensors. |
||
![]() |
|
stownrow Member Since: 12 Mar 2010 Location: Harlow Posts: 461 ![]() ![]() ![]() |
they hold the bumper to the wheel cowling so quite crucial.... ![]() |
||
![]() |
|
stownrow Member Since: 12 Mar 2010 Location: Harlow Posts: 461 ![]() ![]() ![]() |
just taken a pic of how it should look ->
|
||
![]() |
|
wizking Member Since: 18 Mar 2010 Location: Around Posts: 1848 ![]() ![]() ![]() |
Thanks again Stownrow. |
||
![]() |
|
wizking Member Since: 18 Mar 2010 Location: Around Posts: 1848 ![]() ![]() ![]() |
All fitted and looking good. I had all four screws missing and the wheel cowling was loose both sides.. Thanks again stownrow. |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)