Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Dipstick o ring size?
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
Boroboy



Member Since: 18 Sep 2012
Location: North Yorkshire.
Posts: 293

United Kingdom 

Past master wrote:
Boroboy wrote:
Is it 5 litres req for an oil change? Which oil should I use, 5w 30 fully synthetic? Due an oil chnage in six months time, not the D filter this time round. May change it myself. Had plenty of experience with petrol engines. My first D. Well should say, my wife's first D. Bought it for her, will use it too. Especially in the winter Thumbs Up

Your car won't have a DPF, so doesn't need special oil. Castrol Edge 5W30 seems to be the one of choice. Not sure how much you need. If you feel like changing the filter it's a bit fiddly but there is a post on here about it.


Yes your right about not having a DPF. One of the reasons I bought it. Must be a cartridge filter type then. Just changed one on my Astra, needed 32mm socket. This one looks smaller & harder to get to.

Post #155250 20th Sep 2012 4:12 pm
View user's profile Send private message View poster's gallery Reply with quote
Boroboy



Member Since: 18 Sep 2012
Location: North Yorkshire.
Posts: 293

United Kingdom 
Re: Dipstick o ring size?

Thanks for all you help & info guys Thumbs Up Will let you know how I get on with the o ring change. May even post a pic of before & after. Never had this prob before on any car, unusual. The old one seemed to crumble & have flat spots to it, when I took out the dipstick.

Post #155252 20th Sep 2012 4:21 pm
View user's profile Send private message View poster's gallery Reply with quote
superspark



Member Since: 24 May 2009
Location: Devon
Posts: 877

United Kingdom 2008 Freelander 2 TD4 SE Manual Izmir Blue

"O" rings are just a circular rubber ring for the want of a better word, they are very flexible and will stretch so as long as you get a good tight fit it wont slide down pass the grove and end up in the engine sump.
Even if it did end up there it wont cause any harm as the oil pump has a mesh filter on the oil pick up.
I think its disgusting that you took delivery of your car with these simple faults not checked and corrected befor collection.

Post #155253 20th Sep 2012 5:12 pm
View user's profile Send private message View poster's gallery Reply with quote
Boroboy



Member Since: 18 Sep 2012
Location: North Yorkshire.
Posts: 293

United Kingdom 

superspark wrote:
"O" rings are just a circular rubber ring for the want of a better word, they are very flexible and will stretch so as long as you get a good tight fit it wont slide down pass the grove and end up in the engine sump.
Even if it did end up there it wont cause any harm as the oil pump has a mesh filter on the oil pick up.
I think its disgusting that you took delivery of your car with these simple faults not checked and corrected befor collection.

Agree with service, not surprised though. I was more unhappy about the tyre pressures. Rang dealers back about it, had the usual brush off. Looking forward to writing my letter to head office on Monday, regarding lack of spare wheel. Not ringing them back again about it, as I've already done that twice. I will get the spare wheel, just going to take a while longer.
Now going to buy myself a 3 ton scissor jack to go with the spare & a high lift trolley jack to keep in garage. I have a trolley jack, that won't lift high enough Laughing
On a whole very happy with the landy. Had alot of cash spent on it by the previous owner at dealers, New rear disc's & pads, rear handbrake spacers (I think that's what you call them). 4 new tyres. Rear brake light cluster, failed MOT, due to steaming up Laughing All within the last 5 months.
As soon as I've bought another trolley jack, will inspect front pad's & disc's. I'm impressed by the pulling power of the engine from 3rd up to 5th gear, as it's a heavy lump to pull around.

Post #155277 20th Sep 2012 11:51 pm
View user's profile Send private message View poster's gallery Reply with quote
superspark



Member Since: 24 May 2009
Location: Devon
Posts: 877

United Kingdom 2008 Freelander 2 TD4 SE Manual Izmir Blue

I use a 3 ton trolley jack and it works great lifting the car with ease. Just remember if your going to remove the road wheels and or go under the car do make sure its properly supported. Its realy not worth taking a chance on on one jack Thumbs Up

Post #155281 21st Sep 2012 7:17 am
View user's profile Send private message View poster's gallery Reply with quote
taztastic



Member Since: 03 Feb 2011
Location: North West
Posts: 8652

England 

Superspark try here Laughing

Solve your problem

Post #155285 21st Sep 2012 8:42 am
View user's profile Send private message View poster's gallery Reply with quote
npinks



Member Since: 28 Jun 2007
Location: Ls25
Posts: 20090

United Kingdom 

Laughing or stop going to the AA meetings and get back on the bottle your hands with stop shaking and double posting Whistle Former Mod/Member, with the most post & Chicken George Arch nemesis

Post #155288 21st Sep 2012 8:56 am
View user's profile Send private message View poster's gallery Reply with quote
Boroboy



Member Since: 18 Sep 2012
Location: North Yorkshire.
Posts: 293

United Kingdom 

superspark wrote:
I use a 3 ton trolley jack and it works great lifting the car with ease. Just remember if your going to remove the road wheels and or go under the car do make sure its properly supported. Its realy not worth taking a chance on on one jack Thumbs Up

True, would never work underneath one. Two trolley jacks good for swapping over two wheels quickly too. On my other car that is, as onw won't lift high enough Laughing

Post #155308 21st Sep 2012 11:46 am
View user's profile Send private message View poster's gallery Reply with quote
Boroboy



Member Since: 18 Sep 2012
Location: North Yorkshire.
Posts: 293

United Kingdom 
Re: Dipstick o ring size?

Update.
Bought a bag of o rings off ebay. After trying a few for size, now fit's like a glove.
Wrote a letter to the dealer, regarding spare wheel. Two days later, dealer rung back & said they'd send me one out. Landy has now gone.

Post #155818 27th Sep 2012 11:18 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site