Hi all, hope someone can help.

The drivers electric seat on my metropolis has decided to stop working. There's a clicking notice coming from under the seat but no movement when either pressing one of the memory or movement buttons.

A local garage have had a look but said they're never come across this problem before and think it needs a new motor.

Any help would be appreciated.

Cheers

John Life's too short, enjoy yourself

64 plate firenze red metropolis

MY13-14 Electric Seats have quite a few functions that you need to check to give you a better idea of where/what to look at.

Seat base up/down, tilt up down, seat forward backwards, Back forward backwards.
All Memory buttons.
Lumber inflate/deflate.
Seat heating.
Worth checking also are door mirrors for all functions.

If the garage has checked I doubt if it is a misplaced plug, fuse or damaged earth, but it may be handy to remove seat and see what is clicking. (and check connectors haven't been trapped and damaged)
2013 Wiring Diagram shows several motors and connectors.
(I have no idea where I got my wiring diagram from - can anyone help with link to source of download)

Edit - 2013 Wiring Diagrams - you could try here - my laptop is set to try and block adverts so asn't allowed to download info)
https://en.landrover-club.net/manual_download.php?id=823 FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 76k+ miles) (MY2015)

Last edited by IanMetro on 13th Apr 2023 5:40 pm. Edited 1 time in total

One of my code readers has a function to relearn the seat positions but if yours is clicking it needs to have the seat out and the motor and units checked