Hi all, newbie here. My Freelander 2 TD4 HSE HEVAC is giving me trouble. There is no heat coming from both sides and when switching on the heated seats, the lamp is very faint and nothing gets hot. It appears to be worse on the Driver's side and the fan isn't as strong as it used to be either. Also the window defrost isn't working anymore. Any advice please? Many thanks.

Fuses? Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Put a code reader on it and check the live values for the heater blend doors, or if you change the air flow you should be able to hear the blend doors activating.

However my money is on the HEVAC module has gone kaput or possibly a bad wiring or connector fault


You can source a used one from a breakers, just be sure that the codes on the back of the module match.