What about trying some breakers ? FL2 SD4 XS 2013 Orkney Grey

Hi lakelander
yes its a good idea, but could be in same position (button fault), there are plenty on Ebay second hand, tbh it may come to that, just had a reply from Britcar that the buttons are out of stock and have been on back order for a while.

Have you spoken to Duckworths yet? They will likely be able to tell you instantly if any exist in the LR stock system without the hassle of less than useful suppliers happy to take orders (and your money) for unobtanium  2014 Freelander 2 TD4 Manual Dynamic
1956/7 88" Series One Land Rover
1956/7 88" Series One Land Rover - undergoing restoration

Arctic wrote:

I did find other but as you say you are now waiting on RB good luck.

https://lrbritishparts.com/?product=genuin...w-lr039740

https://parts.jaguarlandroverclassic.com/l...ntrol.html

https://britcar.com/product.php/176436/549...switch_fl2

Not sure about these ones, but they may also fit the FL2 ?

https://www.ebay.co.uk/itm/125552252285?_t...%3A2047675

All the above are out of stock

PRadd wrote:

Have you spoken to Duckworths yet? They will likely be able to tell you instantly if any exist in the LR stock system without the hassle of less than useful suppliers happy to take orders (and your money) for unobtanium

PRadd wrote:

Have you spoken to Duckworths yet? They will likely be able to tell you instantly if any exist in the LR stock system without the hassle of less than useful suppliers happy to take orders (and your money) for unobtanium

Have you tried ordering from the landrover classics website (link in various posts above, including mine). It's showing in stock from them. Andy
Freelander2 HSE (59 Plate, MY10 spec)

Hi Andy yup every single recomendation on this post i have tried, it seems they all have stock online, but when you query the switch, they then say "Ah very sorry, these are on back order with no ETA"

Allegedly, they have just the one from a 2009 vehicle in stock @ £22.99

https://g-tec4x4.co.uk/product/genuine-lan...on-switch/

Hi Reggie
i am trying to get a new one tbh, but if all fails then i will go down route of breakers, thank you

Try this.

https://www.lrparts.net/lr023490-ignition-...gJaxvD_BwE 2013 FL2 XS.
Defender 90 300 TDi.
Defender 90 300 TDi CSW.
1964 MGB Roadster.
1944 Willys MB "Jeep" with bullet holes. (gone)
17 hand Irish Drought Thoroughbred (mostly lame)
Nagging Old Boiler.

Thanks Rommel, but unfortunately they are not in stock, its looking like to purchase new its got to come from Fleabay and lithuania

Would the Evoque one not be compatible? DAVE.
I.A.M. F1rst Driver.
Gone 2003 Discovery TD5 Auto,
Gone 1986 Defender 90 Station Wagon
Gone 1984 Range Rover 3.5 Vogue Manual.
Gone 1970 Series 11A/3 SWB 3.5 V8 Hybrid
Gone 1964 Series 11A LWB Van
Gone 1966 Series 11A SWB Van
Gone 1964 Series 11A LWB Station Wagon,

Looking at the back of the Evoque switch it has the same 4 pin plug as the FL2? it maybe possible to change the front shroud over or use as is till a replacement can be found, all these switches appear to be made in Egypt and Malta !

If its true what the dealer said about these no longer being made is very worrying.  2013 FL2 XS.
Defender 90 300 TDi.
Defender 90 300 TDi CSW.
1964 MGB Roadster.
1944 Willys MB "Jeep" with bullet holes. (gone)
17 hand Irish Drought Thoroughbred (mostly lame)
Nagging Old Boiler.

Last edited by Rommel on 10th Jan 2023 10:52 am. Edited 1 time in total

Or even this could fit?

https://www.ebay.co.uk/itm/384923746304?ha...SwvUVho38A 2013 FL2 XS.
Defender 90 300 TDi.
Defender 90 300 TDi CSW.
1964 MGB Roadster.
1944 Willys MB "Jeep" with bullet holes. (gone)
17 hand Irish Drought Thoroughbred (mostly lame)
Nagging Old Boiler.