Evening folks can anyone tell me if a new drivers door control unit requires coding to the car ?
Cheers in anticipation
Sharks MY18 D5 HSE LUX 😎
MY12 FL2 SD4 HSE
Ex D4
Ex D3
Ex D2
Ex D1
Ex FREELANDER 1

It's on the medium speed CAN, so it'll need configuring to the vehicle.
The workshop manual supports that. 2009 Rimini Red SE TD4. Soon to be sold.
Hyundai Ioniq 5 Ultimate on order.
Gone. 2006 Tonga Green i6 HSE.

Hi Nodge
Do you know if it can be done with the IID Tool ? MY18 D5 HSE LUX 😎
MY12 FL2 SD4 HSE
Ex D4
Ex D3
Ex D2
Ex D1
Ex FREELANDER 1

I don't know if the IID can do it, mine stopped working, so I got a mongoose cable and now run SDD for diagnostics. 2009 Rimini Red SE TD4. Soon to be sold.
Hyundai Ioniq 5 Ultimate on order.
Gone. 2006 Tonga Green i6 HSE.

Thanks I’ll have a look.
One of the approach lamps in the mirror has stopped working after I had fitted a new mirror, checked the feed at the door module and only getting 0.2 v and the continuity upto the mirror is good so can’t be the wiring that’s why I think it may need re coding as the nearside one is fine  MY18 D5 HSE LUX 😎
MY12 FL2 SD4 HSE
Ex D4
Ex D3
Ex D2
Ex D1
Ex FREELANDER 1