OK............success!!!! @jules, since so many got this to work I decided to look at other settings in Torque Pro. I am not sure how I fixed this exactly but here is what I also did.

A)Vehicle profile: under "advanced settings", I de-selected "use seperate dashboard layout" (I had it previously checked but I don't know if this fixed my issue so I mentioned this here JIC)

B)Settings->Manage custom PIDs

Here is the PID I used that worked:

22df0a

Transmission Temp Custom

0.0

100.0

degC

A*256+B


I am going to go test it again right now just in case this was a fluke.

EDIT: Still works, IMO.......the de-selecting under vehicle profile of "use seperate dashboard layout" caused this PID to start working.

Nice!