Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Intake manifold part numbers and recommendations
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Basso



Member Since: 29 Aug 2020
Location: Buxted, East Sussex
Posts: 5

United Kingdom 
Intake manifold part numbers and recommendations

I know the swirl flap topic has been done to death on this forum, but I am looking for advice on the actual replacement part. I have just acquired an 08 FL2 diesel and want to nip this problem in the bud if possible. Which manifolds without swirl flaps will work on these engines? Part numbers and experience of anyone who has done this would be useful. I have been looking at XF and Evoque manifolds, would these all work, and do they need to be from the pre 2010 engines? Thanks for any help before I dive in!

Post #397167 19th Sep 2020 11:29 am
View user's profile Send private message View poster's gallery Reply with quote
GWFBrown



Member Since: 19 Nov 2012
Location: EAST DEVON
Posts: 31

England 2008 Freelander 2 TD4 XS Manual Firenze Red

Hi.
I fitted an Evoque manifold to my 2008 XS with no problems.
Regards.
Gordon

Post #397168 19th Sep 2020 11:32 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Badger51



Member Since: 01 Mar 2014
Location: Coffs Harbour
Posts: 910

Australia 

This is the non swirl flap number, it is fitted to many different models of vehicle.

9659449480 (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
171037Km as of 09/05/22
Superchips Bluefin Flash
Nanocom Evo II (also sold)

Post #397169 19th Sep 2020 11:52 am
View user's profile Send private message View poster's gallery Reply with quote
Basso



Member Since: 29 Aug 2020
Location: Buxted, East Sussex
Posts: 5

United Kingdom 

Thanks for the speedy replies - very useful. I will get a second hand XR or Evoque one....

Post #397174 19th Sep 2020 2:32 pm
View user's profile Send private message View poster's gallery Reply with quote
Nodge68



Member Since: 15 Jul 2020
Location: Newquay
Posts: 1769

United Kingdom 2009 Freelander 2 TD4 SE Manual Rimini Red

Basso wrote:
Thanks for the speedy replies - very useful. I will get a second hand XR or Evoque one....

Why not just remove the port flaps from your current manifold? It takes 10 minutes, once the manifold is off the car. 2009 Rimini Red SE TD4. My daily driver.
Gone. 2006 Tonga Green i6 HSE.

Post #397386 24th Sep 2020 2:15 pm
View user's profile Send private message View poster's gallery Reply with quote
DigDil



Member Since: 25 Aug 2015
Location: Wiltshire
Posts: 73

United Kingdom 2008 Freelander 2 TD4 GS Manual Tonga Green

I seem to think the one I replaced mine with came off a Ford. Just one point through the manifold used to have both part number stamped on them(without swirl/with swirl). See https://www.freel2.com/forum/topic31562-15.html

Post #397421 25th Sep 2020 8:08 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site