Just checked my sdd not connected. I had to configure it for region and area so that could be why we can't see it?
The function list for the nt530 has an option for customization on the front lighting control module. 07 to 14.

Where abouts are you, I am lisburn area. Stewart
2007 Freelander 2 SE TD4
2007 A6 quattro 3.0 TDI Manual
1986 coupe quattro (kv) square wheels.
1972 mini 1400 100BHP A series

Bit more digging in sdd, in the session detail I have non daytime running lamps listed and over in config of the ccf a value of 2? So it must be somewhere lol. Stewart
2007 Freelander 2 SE TD4
2007 A6 quattro 3.0 TDI Manual
1986 coupe quattro (kv) square wheels.
1972 mini 1400 100BHP A series

found this thread within the 'SEARCH' facility above.

https://www.freel2.com/forum/topic29146.html

worth a read, as it opened my eyes to a modification on the rear lamp units.

Click image to enlarge

I was out in the country one night pulling out of a side road. Checked for traffic seen 2cdim close together lights so I pulled out. Change of underwear time it was actually a series 1 right at the jct!!! Lol these safety things are making older cars more dangerous!! Stewart
2007 Freelander 2 SE TD4
2007 A6 quattro 3.0 TDI Manual
1986 coupe quattro (kv) square wheels.
1972 mini 1400 100BHP A series

Thanks all.
I will with my limited portuguese language skill go to our local garage and see if their scanner can access the area for the change in settings. I suspect not as their scanner to my knowledge is an old and local one. So it may have to wait until I get to the city.
And thank you for the tip around rear day light running lights, it is a mechanical fix, that is something i am capable off