Hi All, i am Trying to upgrade my steeringwheel to a newer type.

I allready have the new wheel in the car And now i am trying to make the buttons work. But the cables and fittings are totaly different. Has someone experience with This to make iT work?

Thanks all!

See here: http://www.freel2.com/forum/topic26335.html

Its a 2010 to a 2015 wheel

grumsel wrote:

See here: http://www.freel2.com/forum/topic26335.html

Do you Guys know how and where i can buy these parts?


- Blackbox Solutions steering wheel conversion kit (https://blackbox-solutions.com/shop/?code=...item=AC031)
- LR022150 Range Rover Sport steering wheel button wire

And i have steeringwheel heating, herefor you also need a kit? Thanks all 😁

Here you can buy the conversion kit: https://blackbox-solutions.com/shop/product/ac031.
And here you can buy the cable: https://www.ebay.nl/itm/Range-Rover-Sport-...SwAH1ZgHNb (LR022150 is old and is replaced by LR050751).

Both companies will ship to the Netherlands.

Don't know what you need to get the heating part working. Here http://www.freel2.com/forum/topic27087.html someone installed a heated steering wheel in a MY2015 car, I don't know if the required circuit and wires are present in your car. In this thread http://www.freel2.com/forum/topic21108.html someone asked the same question and got the answer it is not possible to get a heated steering wheel working in a FL2 where a heated steering wheel was not a factory option. And I think it was only an option on the later MY2013 FL2's.

Did you go all the way with this project? Pre-Production "000" Td4 FL2 in Santorini Black on Jet Black and Blue...