Hi!
Could you connect the spots?
Are you satisfied with the result?
Which wiring have you used?
I just bought the same spots and a second grill. Just to be safe
I´m so looking forward to start the new project.
Especially my car is black and I have some orange applications on it.
E.G. Water Limit sticker and my rims which I drive in the winter.

So I would be gratful if you could reply and share your experiences
Thank you!

Hi, no not got around to wiring up yet, been a bit busy recently but planning to do so tomorrow.
I've already purchased a pre-made heavy duty wiring loom.

Just be aware that the trim on the lamps is actually red, not orange (as I expected).
So I stripped my lamps and used Orange plasti dip to change them.

Oh thank you for the info.
According to amazon, my spots are arriving on monday. Could you tell me please, which HID´s fit in the spots?
D1S or D2s? Couldn´t find any information about this in the description.

Have a nice weekend!
thommy

Sorry, never paid attention to the bulbs that are already fitted.

All I know is that I went for the 55w option over the 35w

No problem.
Thats interesting. My HID´s are 55W and are to cheap to have already bulbs inside.
But whatever. I´m just gonna wait

Decided I'm keping the Spots, so today went out and readied everything for wiring up.

For those interested in mounting spots similarly, these are the brackets and how I secured them.
The area of the bottom grill is double skinned [sandwithced at the back but with a gap at the front] so I used a combination of straight through bolts, plates & washers along with self tapping screws.
You'll also see the securing ball on the top spar [as described below]

Click image to enlarge

Click image to enlarge

Will you notice that the gril has been cut Ron with the lights new positioning? MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s

Obviously if one looks close up you can see the grill had been cut, but today I've only moved the lights a fraction off the back.
So no you can't really tell.

So hows it going? Got them working yet and if so how good are they?

Well. wired them up a few weeks ago but never really had the chance to use them .....
.... until last night.

Now as usual, videos don't do things any justice.
For example the bulbs I'm running in my headlights are upgraded to Nightbreakers and they are good.
But they look so dim on the opening shot in the video.

Just need to fine tune the beam adjustment now.

 FL2 now gone and have a couple of items left for sale:-

Brodit active iPhone holder + Brodit dash clip,
Bluetooth Music Streaming Module.

Nice job Ronp - I have just replaced 2 of mine !
Wired to main beam - for off road only !

Click image to enlarge

Thanks Radeco

Loving your G4 FL1  FL2 now gone and have a couple of items left for sale:-

Brodit active iPhone holder + Brodit dash clip,
Bluetooth Music Streaming Module.

Last edited by ronp on 3rd May 2015 11:29 am. Edited 1 time in total

Hi Ron!
Nice work! Could you tell me how the lights are fitted? I was looking for the threaded rod but I can´t find them in Germany... And how did you mount the bottom of the lights?
I have all parts ready but I´m going to wire them up different as you did. I use a radio controlled switch for offroad use only. Not very legal in Germany but who cares
Thank you!

EDIT: Sorry I meant where did you screw down the holder for the lights? Only in the grill as shown in the picture?

^

Wired mine into the main beam using a heavy duty harness & relay....legal here in the UK.

I used the bottom brackets as pictured earlier in the post to secure the base.
I did these initially just as a trial to fit the lights.
Plan was to upgrade them with heavier guage brackets, but they seem to be doing the job ok so I'll just keep them as they are [unless I need to change them at some point].

The 'threaded rods' at the top are 'spot light steadies' and you can pick them up from ebay.
http://www.ebay.co.uk/itm/like/33153457226...amp;ff19=0

I also bought a metal sleeve that fits over the threaded section of the lamp steadies, which I coloured in orange.
So Spot Light project now finished .... roll on the darker nights.

Click image to enlarge

Radeco wrote:

Nice job Ronp - I have just replaced 2 of mine !
Wired to main beam - for off road only !

Click image to enlarge

A V6 has she been reliable? Here's a pick of my TD4 I've had her from new! Can't beat AUX lights

Click image to enlarge

Ron looking needing to hook mine up still hopefully the light output will be immense



Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  MY14 Kahn Converted Dynamic - Fuji White Ebony/Pimento Interior
MY15 Xenon Headlight Conversion

MY17 RRS SVR - Estoril Blue Cirrus/Ebony 🪣💺’s