Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Off Roading & Green Laning > self recovery.. how do you do it?
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
Lightwater



Member Since: 21 Aug 2014
Location: Sydney Northern Beaches
Posts: 4704

Ukraine 2013 Freelander 2 2.0T SE Auto Fuji White

mikehzz wrote:
My latest bit of self recovery gear. Works quite well forwards or backwards.


That's a good idea, doesn't take up much room, light & squishy so it will fit anywhere inside the car.

Did you go single or twin? Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Post #294906 29th Mar 2016 6:49 am
View user's profile Send private message View poster's gallery Reply with quote
dorsetfreelander



Member Since: 20 Jul 2013
Location: Dorset
Posts: 4336

United Kingdom 2014 Freelander 2 SD4 XS Auto Loire Blue

Do they supply the tree with it or do you have to hope that there is a suitable one nearby? Shocked 3 x FL1 2 manual + 1 auto
5 x FL2 4 manual + 1 auto
Now Discovery Sport P250 MHEV SE

Post #294915 29th Mar 2016 8:44 am
View user's profile Send private message View poster's gallery Reply with quote
mikehzz



Member Since: 04 Sep 2009
Location: Springwood
Posts: 749

Australia 2008 Freelander 2 TD4 SE Auto Lago Grey

Any winch has to have an anchor point. If you really have to, you can bury your spare tyre vertically as an anchor point, I've done that before but it's hard work.

Last edited by mikehzz on 29th Mar 2016 1:45 pm. Edited 1 time in total

Post #294948 29th Mar 2016 1:29 pm
View user's profile Send private message View poster's gallery Reply with quote
mikehzz



Member Since: 04 Sep 2009
Location: Springwood
Posts: 749

Australia 2008 Freelander 2 TD4 SE Auto Lago Grey

Lightwater wrote:
mikehzz wrote:
My latest bit of self recovery gear. Works quite well forwards or backwards.


That's a good idea, doesn't take up much room, light & squishy so it will fit anywhere inside the car.

Did you go single or twin?


Just the one. It works fine and doesn't pull crooked. For $160 odd it sure beats the $3000-$4000 you need for a winch compatible bullbar plus winch.....not that you can get one for an FL2 anyway. And you aren't lugging around an extra couple of hundred kgs on the front of the car. Plus it will pull backwards or forwards. Half the guys I go on trips with only need their electric winch once every blue moon, they try to use it and it won't go, the electrics are stuffed by too many river crossings and not enough maintenance. A regular occurence, I'm actually surprised if an electric winch works. Smile

Post #294949 29th Mar 2016 1:44 pm
View user's profile Send private message View poster's gallery Reply with quote
Lightwater



Member Since: 21 Aug 2014
Location: Sydney Northern Beaches
Posts: 4704

Ukraine 2013 Freelander 2 2.0T SE Auto Fuji White

In a previous life I supplied aluminium to bullbar manufacturers. Anything to save weight hanging off the front of the car is the go. Better still don't add anything to the front to start with & one will save wear & tear.

mikehzz wrote:
the electrics are stuffed by too many river crossings and not enough maintenance. A regular occurence, I'm actually surprised if an electric winch works. Smile

Less things to break down if they don't have electrics or moving parts. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Post #294986 29th Mar 2016 9:25 pm
View user's profile Send private message View poster's gallery Reply with quote
mikehzz



Member Since: 04 Sep 2009
Location: Springwood
Posts: 749

Australia 2008 Freelander 2 TD4 SE Auto Lago Grey

I'm not sure if aluminium bars are winch compatible. Most winch bars are steel.

Post #294992 29th Mar 2016 10:08 pm
View user's profile Send private message View poster's gallery Reply with quote
Lightwater



Member Since: 21 Aug 2014
Location: Sydney Northern Beaches
Posts: 4704

Ukraine 2013 Freelander 2 2.0T SE Auto Fuji White

Aluminium is strong enough as long as you use the right alloy engineered and built in the correct way designed for the loads. Most of the armour protection used banks etc, is aluminium armour plate, it is tough enough and still not too heavy to manhandle. Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Post #294997 30th Mar 2016 4:02 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site