I need to source a dog guard fitting kit as I have managed to lose one of the supporting brackets.

No luck from my local LR dealer, apparently LR don't supply fitting kits separately therefore I would have to buy a whole new guard!!!

Please get in touch if you can help TD4, HSE, Santorini Black, SS side protection tubes, clear side repeaters, chrome wing mirror covers

try speaking to Nick Lee @ Yeovil Landrover, his forum sponsor and member The Large One on Disco3 - 01935476660

He is know to be more helpfull than most

Which bracket is it the lower or upper one? Former Mod/Member, with the most post & Chicken George Arch nemesis

Thanks, I will give him a shout.

Its the upper bracket on the offside TD4, HSE, Santorini Black, SS side protection tubes, clear side repeaters, chrome wing mirror covers

not as easy to make up yourself then

But you could try a metal work shop, end of the days its just a piece of bent metal with a milled end and a foam pad on a angle

i don't suppose you know where you lost it  Former Mod/Member, with the most post & Chicken George Arch nemesis

Thats the annoying thing, I know exactly where I lost it...at my local recycle centre. I had filled the car up with stuff to take to the skip (hence why the guard was removed). I stupidly left the fixing bits in the boot and forgot about them. The part in question probably fell out when I was unloading at the skip. I have been back but it was a longshot...my car was parked next to the scrap metal skip so someone probably found it lying and threw it in. TD4, HSE, Santorini Black, SS side protection tubes, clear side repeaters, chrome wing mirror covers

I took mine out when i did a few tip runs the other week as i didn't trust the wife

Good luck  Former Mod/Member, with the most post & Chicken George Arch nemesis

Flyboyben - you need to change your name to Flytipperben then you wouldn't have this problem !!  There's always a way forward!

2008 Freelander Td4 GS - Stornoway Grey - Now Gone - Sob
2011 Freelander Td4 GS 150 - Rimini Red - in its place - Better x far x 4!!

Try Disco3 member RLD, he (Ray) might be able to make you one as he has previously made things like protection plates for the D3 so must have some sort of access to metal fabrication

You could send him the one you have, he copies it but turing the angle on plate with the foam pad on so it fits the other side  Former Mod/Member, with the most post & Chicken George Arch nemesis