![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Technical > Torque Converter |
![]() ![]() |
|
|
I Like Chips Member Since: 25 Jun 2017 Location: Faringdon Posts: 1605 ![]() ![]() ![]() |
If you do a full flush by the Gibbons Method you will flush most of the old fluid |
||
![]() |
|
jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5505 ![]() ![]() ![]() |
No - you drain it via the autobox drain - but only about 3L will come out each time you drain - hence the Gibbons method or serial fill and dump method. Jules |
||
![]() |
|
d0zer122 Member Since: 08 Sep 2025 Location: Cape Town Posts: 4 ![]() ![]() ![]() |
If you flush and let’s assume it had never been done before and no leaks, I’d suggest re-filling what you’ve drained by MASS, not by volume. Will help you if you’re concerned about the correct level as this transmission needs level set at around 60degC fluid temperature per the procedure. |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
