Hi All
Has any one replaced the intercooler hose from the bottom plastic section to the drivers side of the intercooler. Part LR066429

I was wondering what is the Best way to do this It loks very tight to get to

The hose connection on the intercooler is virtualy out of site.

Any advice welcome
Richard

Ive just replaced mine without taking the bumper off.

Basically you need a small micro-ratchet to get at the jubilee clip. The OEM jubilee clip at the IC end is attached to the rubber hose.



Although the new hose came with a new plastic ring support for the middle of the hose , I left the original in place and passed the old and new hoses through it by squeezing the hose end using a cable tie.
A smear of oil to the the hose and IC connection helps hugely. Jules