Freel2.com - View topic - LR2 2008 HSE i6 3.2L AC problem high pressure high


Forum-Gallery-Shop-Sponsors « Advertise on Freel2.com

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > LR2 2008 HSE i6 3.2L AC problem high pressure high

Page 1 of 1

Print this entire topic ·

z1234567890

Member Since: 06 Aug 2018
Location: DXB
Posts: 43

LR2 2008 HSE i6 3.2L AC problem high pressure high

Hello I have hot air blowing only
I check with AC gauge and this is the result

How to understand the issue? any reference?

2nd May 2025 10:08 am

p_gill

Member Since: 06 Dec 2011
Location: USA
Posts: 1296

2008 Freelander 2 i6 SE Auto Tambora Flame

The low pressure side should be about 40 PSI and you are at 100 PSI.

If it were me I would remove some of the Gas.

When my compressor failed on my 3.2 the high pressure side did not go up high enough and you don't have that problem.

Also verify that the fans attached to the radiator are running, if not then you won't get any cooling unless the LR2 is moving.

For reference here is my vent temperature

Click image to enlarge

https://www.freel2.com/forum/topic37022.html

Good luck

Paul

2nd May 2025 4:24 pm

MotionInc

Member Since: 17 Jun 2019
Location: North America
Posts: 1377

15 degrees C! Dayum!

2nd May 2025 11:30 pm

I Like Chips

Member Since: 25 Jun 2017
Location: Ascott Under Wychwood
Posts: 1584

2011 Freelander 2 SD4 HSE Auto Indus Silver

https://archive.org/details/haynesautomoti...7/mode/2up

3rd May 2025 9:45 pm

Page 1 of 1

All times are GMT + 1 Hour

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum