|
|
| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
 | Home > Maintenance & Modifications > Engine replacement- all the same? |
 
|
|
|
| Nodge68 Member Since: 15 Jul 2020 Location: Newquay Posts: 1832   
|
There are differences to between different DW12s, depending on the original vehicle it was installed in. However an engine from a Freelander is a direct swap. 2009 Rimini Red SE TD4. Soon to be sold.
|
||
11th Mar 2024 3:29 pm |
|
| dorsetfreelander Member Since: 20 Jul 2013 Location: Dorset Posts: 4341 
|
Don't forget that pre 2011 models didn't have a DPF so probably quite a few subtle differences with injectors, air intake and ECU and mapping etc to get the emissions right. If you are going to replace the engine I would go for something as near as possible to the one coming out. Good luck. 3 x FL1 2 manual + 1 auto
|
||
|
11th Mar 2024 8:03 pm |
|
| Apache Member Since: 03 Jul 2012 Location: Yorkshire Posts: 126 
|
Yes this has a DPF, will change anything else over that I need to. Didn't know if basic engine was different, as DPF after the engine. |
||
|
11th Mar 2024 8:45 pm |
|
| dorsetfreelander Member Since: 20 Jul 2013 Location: Dorset Posts: 4341
|
One other thing the post 2013 cars were different to the earlier models as they incorporated a lot of stuff from the Evoque as the FL2 was being phased out and common systems (mechanical and electrical) were included in the manufacturing process. I take it you are talking about a manual gearbox? 3 x FL1 2 manual + 1 auto
|
||
|
12th Mar 2024 12:27 am |
|
| Trent63 Member Since: 20 Dec 2022 Location: Russia Posts: 36  
|
you can change it to any one. The only thing is to put your old attachments, a turbine and candles and injectors |
||
|
12th Mar 2024 2:03 pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
