Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
Home > General > Any ideas where this might have come from? |
|
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1701 |
Found this in the drivers footwell. Can’t see where it’s come from. Any known areas this may have come from?
|
||
6th Apr 2023 1:10 pm |
|
gasman Member Since: 02 May 2013 Location: Tyneside Posts: 859 |
I know it's not what you want to hear but it could be from anywhere under the dashboard. Now at the point when I learn something new something old is lost out the other side !
|
||
6th Apr 2023 1:27 pm |
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1701 |
You’re right that’s not what I was hoping for 😂😂 Learned to drive in 2011.
|
||
6th Apr 2023 1:32 pm |
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1701 |
Thanks Lightwater. Learned to drive in 2011.
|
||
6th Apr 2023 1:33 pm |
|
Bobupndown Member Since: 26 Dec 2014 Location: Upside down behind the TV! Posts: 2652 |
|
||
6th Apr 2023 1:44 pm |
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1701 |
Ha no way! What are the chances!! Learned to drive in 2011.
|
||
6th Apr 2023 1:45 pm |
|
Dartman the one Member Since: 04 Apr 2013 Location: Seville, Spain Posts: 1651 |
The other option is it's left over from build, one of those screws that fell out of specialised holder when fitting those can't get at screws in the factory, interesting both cars are 2014. my PC is slightly to the right of Genghis
|
||
6th Apr 2023 6:17 pm |
|
Bobupndown Member Since: 26 Dec 2014 Location: Upside down behind the TV! Posts: 2652 |
A 'pocket bolt' as my dad describes left over fasteners after taking something apart and putting most of it back together. Landrover - turning owners into mechanics since 1948
|
||
6th Apr 2023 6:39 pm |
|
alex_pescaru Member Since: 12 Mar 2009 Location: RO Posts: 4640 |
|
||||
6th Apr 2023 10:36 pm |
|
Lightwater Member Since: 21 Aug 2014 Location: Sydney Northern Beaches Posts: 4732 |
That's the one. Just had a look at mine, actually it was a bit loose, 7mm socket. Maybe I overtightened mine removing these panels a few times.
|
||
7th Apr 2023 12:16 am |
|
Chuckalicious Member Since: 23 May 2014 Location: Midlothian Posts: 1701 |
Yes Alex! Learned to drive in 2011.
|
||
7th Apr 2023 1:31 pm |
|
JulesK Member Since: 07 Dec 2014 Location: Ceredigion. Posts: 1652 |
Checked my 14 after seeing this and low and behold it's loose !!! If it wasn't so bad it'd be funny.
|
||
12th Apr 2023 7:34 am |
|
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis