Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > General > Floppy Gear Lever
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
RichardM



Member Since: 07 Jul 2015
Location: Cardiff
Posts: 72

United Kingdom 2011 Freelander 2 TD4 GS Manual Lago Grey
Floppy Gear Lever

I have a manual FL2 TD4. This evening I was reversing out of a car park, stalled, reversed a bit more. Went forward a bit, stalled, then had a very odd noise from the engine as if it was almost stalling. I tried to put the car in to neutral but the gear lever was all floppy. I stalled the engine by lifting my foot of the clutch.
Now, the engine starts and runs normally if I have my foot on the clutch. If I lift off slowly the car creeps forward, more like it is in third rather than the first (which I thought it was in). I can stop the engine with the button if the clutch is pressed.
The gear lever is all floppy and won't disengage third (or first, which ever gear it is in).
And ideas what is going on? My guess is something collapsed in the linkage between the lever and the gear box.
I'll be calling the breakdown people in the morning. Richard M

Post #428478 4th Jan 2023 10:29 pm
View user's profile Send private message View poster's gallery Reply with quote
BossBob



Member Since: 30 Sep 2010
Location: Bristol
Posts: 1253

England 2007 Freelander 2 TD4 GS Manual Baltic Blue

The gear change lever is attached to the gearbox by a cable. It could have snapped, which I’ve not heard of, or it might have become so loose that something has jumped out of its mounting. The gearbox end is easy to see, just underneath the air filter. The gear change end is a little more difficult.

Post #428482 5th Jan 2023 9:06 am
View user's profile Send private message View poster's gallery Reply with quote
RichardM



Member Since: 07 Jul 2015
Location: Cardiff
Posts: 72

United Kingdom 2011 Freelander 2 TD4 GS Manual Lago Grey

It's at the garage now but they are very busy to it could be a week before I hear anything.
I'm hoping it's only the linkage but have a horrible feeling it maybe the gear box Richard M

Post #428485 5th Jan 2023 12:42 pm
View user's profile Send private message View poster's gallery Reply with quote
RichardM



Member Since: 07 Jul 2015
Location: Cardiff
Posts: 72

United Kingdom 2011 Freelander 2 TD4 GS Manual Lago Grey

It was the cable that had failed.
£137+vat for the cable and four hours labour. The dash had to come out.
At least it wasn't the gearbox. Richard M

Post #428684 11th Jan 2023 12:03 pm
View user's profile Send private message View poster's gallery Reply with quote
BossBob



Member Since: 30 Sep 2010
Location: Bristol
Posts: 1253

England 2007 Freelander 2 TD4 GS Manual Baltic Blue

Thanks for letting us know the outcome. A bit surprised the dash had to come out!

Post #428697 11th Jan 2023 6:12 pm
View user's profile Send private message View poster's gallery Reply with quote
Badger51



Member Since: 01 Mar 2014
Location: Coffs Harbour
Posts: 914

Australia 

I doubt very much that the dash had to come out, the console perhaps!
I had to remove the dash in the wife's MX5 recently to fix an aircon issue. Not a job for the faint hearted, in fact most repairers won’t even quote for it, due to the high labour costs involved.
If anybody can remove/refit a dash on a FL2 in four hours they deserve all the plaudits they can get! (Now Sold). 2008 Freelander 2 (Nazca Sand) SE TD4 Auto. Statutory write off & on WOVR for hail damage but still road legal.
171037Km as of 09/05/22
Superchips Bluefin Flash
Nanocom Evo II (also sold)

Post #428703 11th Jan 2023 10:17 pm
View user's profile Send private message View poster's gallery Reply with quote
RichardM



Member Since: 07 Jul 2015
Location: Cardiff
Posts: 72

United Kingdom 2011 Freelander 2 TD4 GS Manual Lago Grey

He said "dash", when I collected it. He also said he never wants to do another one! Richard M

Post #428705 11th Jan 2023 11:09 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site