Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > Muddy Mods raised air intake
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
teagzgr



Member Since: 15 Oct 2019
Location: Cornwall
Posts: 36

United Kingdom 2010 Freelander 2 TD4 HSE Auto Galway Green
Muddy Mods raised air intake

Just received my copy of LRO and they feature a raised air intake install on a freelander 2 anyone on the forum given this a go? I don't like the idea of cutting a hole in my wing but it makes sense for a truly sealed system?


Click image to enlarge



Click image to enlarge

[/u]

Post #423747 31st Jul 2022 4:52 pm
View user's profile Send private message View poster's gallery Reply with quote
CJOver



Member Since: 27 Nov 2014
Location: Biggleswade, Bedfordshire
Posts: 622

United Kingdom 2014 Freelander 2 SD4 HSE Lux Auto Santorini Black

These are the details from their website.

https://www.muddymods.com/collections/free...-2-snorkel

Their bits are usually very well designed and manufactured.

. MY13 HSE Lux Santorini Black
MY11 HSE Santorini Black Gone
MY08 SE Blue, Gone
Alfa Romeo GT Gone
Alfa Romeo 156 Space wagon Gone
Volvo V40 Gone
Volvo 480ES Gone
VW Sirocco GTX Gone

Post #423748 31st Jul 2022 5:04 pm
View user's profile Send private message View poster's gallery Reply with quote
Nodge68



Member Since: 15 Jul 2020
Location: Newquay
Posts: 1769

United Kingdom 2009 Freelander 2 TD4 SE Manual Rimini Red

It's good to see Warren still having his products featured in LRO magazine.

Unfortunately raised air intakes aren't for water, but for lifting the air intake above road dust. A Freelander 2 floats before the factory intake is flooded, or it would if it was properly sealed. 2009 Rimini Red SE TD4. My daily driver.
Gone. 2006 Tonga Green i6 HSE.

Post #423751 31st Jul 2022 5:10 pm
View user's profile Send private message View poster's gallery Reply with quote
teagzgr



Member Since: 15 Oct 2019
Location: Cornwall
Posts: 36

United Kingdom 2010 Freelander 2 TD4 HSE Auto Galway Green

Yeah the quality would be unquestionable just wish it could have used the factory cut out like this one.

https://www.fj4x4.com.br/pagina-de-produto...l-models-2

Can't order it unfortunately. If I do decide to go down the muddy Mods route I'll be sure to document the install for the forum Thumbs Up

Post #423753 31st Jul 2022 5:15 pm
View user's profile Send private message View poster's gallery Reply with quote
Boxbrownie



Member Since: 17 Mar 2019
Location: Looe
Posts: 2053

United Kingdom 2007 Freelander 2 i6 HSE Auto Stornoway Grey

Are you sure, a lot of water goes places you’d never suspect before a car floats Whistle

Click image to enlarge
 Regards

David

Lovely i6 has now gone, but not me......

Please let me know if anything in my post offends you, as I may wish to offend you again......

Post #423754 31st Jul 2022 5:17 pm
View user's profile Send private message View poster's gallery Reply with quote
Boxbrownie



Member Since: 17 Mar 2019
Location: Looe
Posts: 2053

United Kingdom 2007 Freelander 2 i6 HSE Auto Stornoway Grey

Nodge68 wrote:
or it would if it was properly sealed.


Must admit after chasing through the intake system on my i6 when we first bought it I was shocked at the very poor fitting components of the system, having worked on systems to prevent water ingress I couldn’t believe this on a LR. Regards

David

Lovely i6 has now gone, but not me......

Please let me know if anything in my post offends you, as I may wish to offend you again......

Post #423756 31st Jul 2022 5:23 pm
View user's profile Send private message View poster's gallery Reply with quote
BossBob



Member Since: 30 Sep 2010
Location: Bristol
Posts: 1238

England 2007 Freelander 2 TD4 GS Manual Baltic Blue

The air intake ducting between the opening on the front wing at the gill vent and the air filter isn’t watertight, probably not even air tight. You need to check the flap valve on the drain at the bottom of the air box.

Post #423769 31st Jul 2022 9:23 pm
View user's profile Send private message View poster's gallery Reply with quote
Boxbrownie



Member Since: 17 Mar 2019
Location: Looe
Posts: 2053

United Kingdom 2007 Freelander 2 i6 HSE Auto Stornoway Grey

When I checked the i6 the water egress valve had been removed! Regards

David

Lovely i6 has now gone, but not me......

Please let me know if anything in my post offends you, as I may wish to offend you again......

Post #423778 1st Aug 2022 9:56 am
View user's profile Send private message View poster's gallery Reply with quote
BossBob



Member Since: 30 Sep 2010
Location: Bristol
Posts: 1238

England 2007 Freelander 2 TD4 GS Manual Baltic Blue

It’s still present on the latest Evoque.

Post #423780 1st Aug 2022 10:30 am
View user's profile Send private message View poster's gallery Reply with quote
ozjeff62



Member Since: 28 May 2018
Location: Sydney, NSW
Posts: 494

Australia 2011 Freelander 2 SD4 SE Auto Ipanema Sand

Why would they cut a hole instead of using the huge hole that's already there?

The RAI kit I installed extends through the mudguard right to the airbox.

I did cut a hole to install a snorkel on my Disco 1 though. One of those big growing experiences! MY11 SD4 SE Auto

Post #423782 1st Aug 2022 10:37 am
View user's profile Send private message View poster's gallery Reply with quote
Boxbrownie



Member Since: 17 Mar 2019
Location: Looe
Posts: 2053

United Kingdom 2007 Freelander 2 i6 HSE Auto Stornoway Grey

BossBob wrote:
It’s still present on the latest Evoque.

I would hope so Regards

David

Lovely i6 has now gone, but not me......

Please let me know if anything in my post offends you, as I may wish to offend you again......

Post #423783 1st Aug 2022 10:40 am
View user's profile Send private message View poster's gallery Reply with quote
RPoul87



Member Since: 23 Apr 2021
Location: Woking
Posts: 75

United Kingdom 2008 Freelander 2 TD4 XS Auto Orkney Grey

Installed it the other week. Pretty easy install and clear instructions. Chose to stich drill and file down the cut out rather than using a hole cutter. Haven't tested it out in deep water yet.


 Corrado VR6 Mystic Blue - Gone
Freelander 2 Orkney Grey

Post #423803 2nd Aug 2022 8:15 am
View user's profile Send private message View poster's gallery Reply with quote
teagzgr



Member Since: 15 Oct 2019
Location: Cornwall
Posts: 36

United Kingdom 2010 Freelander 2 TD4 HSE Auto Galway Green

Cheers for the pictures I ordered the RAI yesterday going to video the installation and stick it on YouTube

Post #424548 23rd Aug 2022 4:10 pm
View user's profile Send private message View poster's gallery Reply with quote
ReggiePerrin



Member Since: 13 Mar 2013
Location: Derbyshire
Posts: 1241

England 2013 Freelander 2 SD4 HSE Lux Auto Firenze Red

A fellow member, 'cqr', fabricated his own 'snorkel' - this thread has some details and some images….
https://www.freel2.com/forum/topic22616.ht...p;start=75

Post #424561 23rd Aug 2022 10:41 pm
View user's profile Send private message View poster's gallery Reply with quote
teagzgr



Member Since: 15 Oct 2019
Location: Cornwall
Posts: 36

United Kingdom 2010 Freelander 2 TD4 HSE Auto Galway Green

Well, sorry to say I did not do a video in the end but I took plenty of pictures and am please to say all done! I must confess it was a real breeze to install the most difficult part for me was removing the arch liner and mud flap due to weathering corroding the screws.

After removing the arch liner and mud flap

Click image to enlarge


I did not remove the headlight tray there was enough space to squeeze the pipe through although I has to cut the original ducting out as there was not enough space to remove this without removing the headlight tray.

Click image to enlarge


I cut out the template included and taped it in place along with masking up the surrounding area to prevent swarf from scratching the surrounding paint work. I cut around the hole to be made by using a craft knife then marked over it with a marker pen.

Click image to enlarge


I then used a centre punch to punch the centres of the 75mm and 20mm holes required. I used a 76mm hole saw and step drilll.

Click image to enlarge


Click image to enlarge



I could have used my angle grinder but chose to use tin snips to finish it off

Click image to enlarge


After filing down the rough edges and treating with paint and allowing to dry I fitted the rubbed seal to protect the edges of the cut out and trial fitted the raised air intake


Click image to enlarge


At this point I applied masking tape to the A frame, cut back the rubber seal on the A Frame and positioned the intake to mark the location of the 4x5mm holes required for the rivets (also included) and deburred and painted the bare metal, to allow good time for this to dry I proceeded to run the duct along the top of the wing following the original pipe work to the filter box.

Previous to this step I had already inserted the adaptor included in the kit and sealed with sealant (also provided) this allows the pipe to fit onto the factory filter box.

Click image to enlarge


It was just a simple matter after the paint dried to fit the air intake into position and rivet into place, then using the sealant provided to resecure the rubber seal previously cut back to accommodate the air intake bracket.



I really love the look of this, I placed my hand over the intake whilst the engine was running to the point it was going to cut out so hopefully a very sealed system Very Happy

Click image to enlarge


Post #426756 11th Nov 2022 2:47 pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site