Hi guys!,

Anyone know your size of this part of the exhaust?, My exhaust hanger has fallen off and I need to get a third party one. Something similar to this.

Click image to enlarge

Big, about 63mm IIRC.
I'll measure mine tomorrow if I remember. 2009 Rimini Red SE TD4. Soon to be sold.
Hyundai Ioniq 5 Ultimate on order.
Gone. 2006 Tonga Green i6 HSE.

Thought you had the old as shown in your photo https://www.freel2.com/forum/topic38443.html can you not measure that? And the diameter of the exhaust that is still on the car.

There only about 40% of it left or I would have done.

What I was suggesting is that from underneath the car assuming the exhaust is still sound and strong enough for a aftermarket clamp you measure the diameter of the exhaust pipe where the bracket was with a vernier/calliper gauge then you would know what size you need. The old method to calculate the diameter is the radus of the pipe divided by pi (3.14 approx) mathematical value this would give you the diameter of clamp you need.

I'm nowhere near my FL2, it's currently park in Wales and I'm in Scotland, this is why I asking, just trying to order the part for when I get home.

Go over to PowerfulUK and look for tailpipe ends for your model and they will likely have the size in the details. If that does not work, research replacement exhausts for your model and the size of the pipe should be in the details.

That makes sense now, could not understand previously.

Nodge68 wrote:

Big, about 63mm IIRC.
I'll measure mine tomorrow if I remember.