Greetings everyone and thank you for sharing all the information that I have already read. I am now hoping that I can dig through to a bit more information

I have started to change the disks and pads on a MY14 car, the one with the electric handbrake, and found that I the replacement caliper bolts I bought were the wrong type

I bought LR000098 which are the only ones I could find listed but when I went to fit them I found they are roughly 5mm shorter than the original bolts and that the lock fluid area would only engage about 1 to 2 turns in the caliper threads

I am hoping to find out what the real part number is and what the torque setting is for these bolts as the original bolts look to be stretch bolts that were fitted without locking fluid

I say original as the vehicle has only covered 46k and given the state of wear I think the disks are original

Have a look on https://www.advancedfactors.co.uk/rear-bra...2858-c.asp and see if the part is shown.

Hi Mike

Part number you require is LR042690, Please follow the link below to our Website.
https://www.advancedfactors.co.uk/lr042690...2721-p.asp Paul Redding
+44 (0)23 8052 2760
Order Parts Online at www.advancedfactors.co.uk

BossBob wrote:

Have a look on https://www.advancedfactors.co.uk/rear-bra...2858-c.asp and see if the part is shown.

 Paul Redding
+44 (0)23 8052 2760
Order Parts Online at www.advancedfactors.co.uk

Excellent thank you, LR042690 is the bolt I need. I obviously need to improve my search ability.

I bought the others on the basis the well known site said that they fitted FL2 all years

As far I can see the correct torque for LR042690 is still 110nm is that correct?