Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > General > Unable to calibrate window...
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
NeilTD4



Member Since: 21 May 2018
Location: Warwickshire
Posts: 133

England 2011 Freelander 2 SD4 HSE Auto Lago Grey
Unable to calibrate window...

As title really, I can't seem to calibrate the drivers door window. I've tried it a few times.

It goes all the way down on the one shot.

I've done a full scan using my Foxwell NT644 which didn't show any faults to do with the door or body modules.

So, I'm a little stumped...

Post #422028 5th Jun 2022 3:30 pm
View user's profile Send private message View poster's gallery Reply with quote
Nodge68



Member Since: 15 Jul 2020
Location: Newquay
Posts: 1769

United Kingdom 2009 Freelander 2 TD4 SE Manual Rimini Red

I use SDD to calibrate mine, which takes just a few seconds, but Gap's IID BT will also calibrate them. I find diagnostic calibrations faster and more reliable, which is why I do it that way. 2009 Rimini Red SE TD4. My daily driver.
Gone. 2006 Tonga Green i6 HSE.

Post #422036 5th Jun 2022 5:18 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 4518

United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

I thought you just kept each button depressed or raised for a few seconds after the glass had reached its limit moving up or down.

edit : Actually IIRC you have to release the switch when the window reaches the limit and then re-engage the switch for several seconds. Jules

Post #422039 5th Jun 2022 5:54 pm
View user's profile Send private message View poster's gallery Reply with quote
NoDo$h



Member Since: 27 May 2008
Location: fings go booooom.
Posts: 490

England 2010 Freelander 2 TD4 HSE Auto Santorini Black

I made the mistake of thinking that if you had calibrated for one-shot down, it automatically worked for up. Turns out you have to do it twice - once for up, once for down (hold switch until window fully up, then keep it held for a second or so - you'll notice a slight jump in the motor tension when it has calibrated). Current driveway contents:
2021 V60 Cross Country B5
2009 FL2 dog bus and shooting wagon

On Order: 2023 Fisker Ocean Ultra - deposit paid.

Post #422040 5th Jun 2022 5:59 pm
View user's profile Send private message View poster's gallery Reply with quote
MotionInc



Member Since: 17 Jun 2019
Location: North America
Posts: 1278

Canada 2008 LR2 i6 SE Auto Tambora Flame

You can feel it and hear it calibrate.

Post #422047 5th Jun 2022 8:28 pm
View user's profile Send private message View poster's gallery Reply with quote
NeilTD4



Member Since: 21 May 2018
Location: Warwickshire
Posts: 133

England 2011 Freelander 2 SD4 HSE Auto Lago Grey

OK, thank you. I'll have another go, I had been trying the release then hold method for both up and down...

Will have another go...

Does each window need to be calibrated from it's relevant door, or can I do all from the drivers door switches?

It's not doing the thing with the rear windows either, where they're only supposed to drop just a little if you have a front window open.

Something that was introduced part way through 2009 to stop buffeting you get from having just a front window open...

Post #422064 6th Jun 2022 11:31 am
View user's profile Send private message View poster's gallery Reply with quote
NoDo$h



Member Since: 27 May 2008
Location: fings go booooom.
Posts: 490

England 2010 Freelander 2 TD4 HSE Auto Santorini Black

You can do them all from the driver's door switches.

I didn't know about the rear dropping thing, shall see if my 59 plate does it later. Current driveway contents:
2021 V60 Cross Country B5
2009 FL2 dog bus and shooting wagon

On Order: 2023 Fisker Ocean Ultra - deposit paid.

Post #422068 6th Jun 2022 11:58 am
View user's profile Send private message View poster's gallery Reply with quote
NoDo$h



Member Since: 27 May 2008
Location: fings go booooom.
Posts: 490

England 2010 Freelander 2 TD4 HSE Auto Santorini Black

Rear window does not automatically drop open when front fully opened on mine - at least not while stationary. Could it be something this is speed dependent? Current driveway contents:
2021 V60 Cross Country B5
2009 FL2 dog bus and shooting wagon

On Order: 2023 Fisker Ocean Ultra - deposit paid.

Post #422086 6th Jun 2022 6:45 pm
View user's profile Send private message View poster's gallery Reply with quote
MotionInc



Member Since: 17 Jun 2019
Location: North America
Posts: 1278

Canada 2008 LR2 i6 SE Auto Tambora Flame

My 2008 LR2 also does not open the rear windows as suggested; best to have a look see in the operation manual even though I can see that feature would be neat. Thumbs Up

Post #422090 6th Jun 2022 7:56 pm
View user's profile Send private message View poster's gallery Reply with quote
NeilTD4



Member Since: 21 May 2018
Location: Warwickshire
Posts: 133

England 2011 Freelander 2 SD4 HSE Auto Lago Grey

To update, I have sorted the drivers door window. Just held the switch up for a touch longer than i had on previous goes Rolling Eyes

Iirc the rear window thing works on a quick press if you have the front window open and just opens a little way.

It didn't work on my 09.

Post #422091 6th Jun 2022 7:56 pm
View user's profile Send private message View poster's gallery Reply with quote
Grimdog



Member Since: 08 Sep 2020
Location: Wakefield
Posts: 305

United Kingdom 2010 Freelander 2 TD4_e HSE Manual Barolo Black

As stated above by NeilTD4, this is exactly how my 2010 HSE works. Iirc it's for ventilation for the dogs / buffeting.

Post #422104 7th Jun 2022 9:09 am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site