Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > removing oil filter 2012 fl2
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
Aveling



Member Since: 24 Mar 2011
Location: Cardiff
Posts: 247

United Kingdom 2014 Freelander 2 SD4 Metropolis LE Auto Firenze Red

That's ok - you only really need to change the filter.
No need for another lot of new oil.

Post #405916 29th Mar 2021 3:27 pm
View user's profile Send private message View poster's gallery Reply with quote
Crommie



Member Since: 21 Aug 2021
Location: Midlands
Posts: 12

United Kingdom 2009 Freelander 2 TD4 GS Manual Santorini Black

Firstly I would like to thank all the contributors
New owner working and checking the FL2 09 from end to end
So far so good but a little feedback on the oil filter

I can see why it get left and after reading the post that its known not to chenged I was really keen to change it and do a couple of "quick " oil changes ( like an engine flush )

anyway the oil filter housing was tight and having a decent set of tools available sockets . spanners , straps etc it was not budging and a bit frightened to damage the housing / cap
I ordered a repancement "cap" and a couple of different sockets and still unable to get a ratched on the socket just too tight without removing the coolong fans
.I had also ordered the 27mm flexible ratechet and Simple's using no real force and working from underneath it became loose and easy to unscrew takes a bit of time but a Big Thank You to genius who first tried it and all the guys recommending it
I would say there is a bit of a knack to unscrewing it as it as it slipped off few when returning the ratched back to the start point , may be the housing nut is worn but it did nor round off the nut may be worth gettting a mate just to hold it in place , but it did not slip off when tightening
So plus 1 on on the 27 mm flexible spanner 30 min job and thet was a first timer I'll change the cap on the next oil change and now yes it awkward andits even tight to get the cap out to clean and fit a new filter , but once you have done it its a lot easier

Post #412062 7th Sep 2021 5:51 pm
View user's profile Send private message View poster's gallery Reply with quote
Bobupndown



Member Since: 26 Dec 2014
Location: Upside down behind the TV!
Posts: 2622

United Kingdom 2014 Freelander 2 SD4 GS Auto Orkney Grey

You tend to gather a number of tools specifically for one job on cars that you maintain yourself and keep for a number of years. Easy when you know how 👍 Landrover - turning owners into mechanics since 1948

2014 Orkney grey Freelander SD4 GS.
2004 Zambezi silver Discovery 2 Td5 (Gone)
1963 Surf blue Morris Mini Minor Super de Luxe (my little toy)

Post #412067 7th Sep 2021 7:45 pm
View user's profile Send private message View poster's gallery Reply with quote
Crommie



Member Since: 21 Aug 2021
Location: Midlands
Posts: 12

United Kingdom 2009 Freelander 2 TD4 GS Manual Santorini Black

Too true a small price to pay for the experience , knowledge and to be sure the job was done correctly

it will pay for its self in no time


Crommie

Post #412068 7th Sep 2021 8:06 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 4517

United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

Bobupndown wrote:
You tend to gather a number of tools specifically for one job on cars that you maintain yourself and keep for a number of years. Easy when you know how 👍


Indeed you do, and some you make yourself.
I ought to get a pic of all my "special" tools that I've made or acquired over the years Jules

Post #412116 8th Sep 2021 10:32 pm
View user's profile Send private message View poster's gallery Reply with quote
Bogart



Member Since: 20 May 2015
Location: Norfolk
Posts: 440

United Kingdom 2010 Freelander 2 TD4 XS Auto Stornoway Grey

Never ceases to amaze me every time I do the filter what a dire design. Plus this may be the reason the filter is so damned small as well, surely that is not good. I have had 2.4l Volvo diesels where the filter was not much smaller than a bucket.
Have to laugh at the Haynes book telling you the torque for the filter housing, might be okay if you have the front end off!

Post #412697 26th Sep 2021 2:54 am
View user's profile Send private message View poster's gallery Reply with quote
Andy131



Member Since: 09 Dec 2009
Location: Manchester
Posts: 2159

United Kingdom 

Obviously never bought an Alpha then.
One of my work colleagues bought one - no idea which one and he now drives a 5 series BMW which says a lot. Anyway he took it in for it's first service and was given the option - engine out, or cut and shut the chassis leg to allow enough room to change the oil filter.

Oh so I laughed when he told me, you have to remember we are car nuts and Land Rover doesn't have the best or sportiest reputation.

Could be worse - Disco 3/4 body off for belt changes anyone? Tangiers Orange - gone, missing her
Replaced by Ewok what a mistake - now a happy Disco Sport owner

Post #412705 26th Sep 2021 10:15 am
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 4517

United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

Bogart wrote:

Have to laugh at the Haynes book telling you the torque for the filter housing, might be okay if you have the front end off!


It only needs to be hand tight. The torque setting is to stop the unthinking from over tightening it. Jules

Post #412712 26th Sep 2021 12:20 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 4517

United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

Bogart wrote:
Never ceases to amaze me every time I do the filter what a dire design.


Its a cinch compared to the Diahatsu Copen.
You have to pass a special small screw-on filter through a gap in the front engine mount from underneath (only fingers can get through it), rotate the filter 90 degrees and screw it on using a cup wrench and ratchet.

Click image to enlarge


You cannot get the small filter anymore and the standard size wont fit through the engine mount. So its off with the bumper & lights, grill and turbo intercooler - a nightmare. Jules

Post #412713 26th Sep 2021 12:28 pm
View user's profile Send private message View poster's gallery Reply with quote
Jagracer



Member Since: 22 Feb 2019
Location: east anglia
Posts: 156

United Kingdom 2009 Freelander 2 TD4 GS Manual Bali Blue

I took the engine out to change the filter. Easy Peasey with a 27mm hex socket. I once nearly bought a Ferrari Mondial Quatroporte, then discovered that the twenty five thousand mile service entailed dropping the whole drive and engine out, twenty odd bolts to change the Cambelts and filter, also reset the tappets. £3000 at the main dealer, people will not buy them second hand without a Main Dealer stamp.
I have an old 27mm cranked head ring spanner, it fits the filter nut in situ, worth keeping an eye out for one at boot sales.

Post #412716 26th Sep 2021 1:54 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site