Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > BRAKE PADS
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
william john



Member Since: 19 Aug 2018
Location: penn wolverhampton
Posts: 125

United Kingdom 2012 Freelander 2 TD4 HSE Auto Stornoway Grey
BRAKE PADS

Can anyone shed any light on whether or not copper grease should be applied to metal contact surfaces when changing brake pads. My Haynes manual says that Land Rover insist not but on all my other cars I applied grease as a matter of course. Your thoughts please.

Post #385576 31st Jan 2020 11:39 am
View user's profile Send private message View poster's gallery Reply with quote
Denboy



Member Since: 24 Oct 2019
Location: Merseyside
Posts: 56

United Kingdom 2007 Freelander 2 TD4 S Auto Stornoway Grey

Hi used it on mine with no problems used a rubber kind grease on the slide pins

Post #385577 31st Jan 2020 11:44 am
View user's profile Send private message View poster's gallery Reply with quote
dorsetfreelander



Member Since: 20 Jul 2013
Location: Dorset
Posts: 4336

United Kingdom 2014 Freelander 2 SD4 XS Auto Loire Blue

Always used copper grease on pads and pins and on wheel bolts and alloy wheel mating surfaces. I helped the lady next door a few weeks ago with a puncture and had real problem getting the wheel off as the alloy was stuck to the hub. 3 x FL1 2 manual + 1 auto
5 x FL2 4 manual + 1 auto
Now Discovery Sport P250 MHEV SE

Post #385592 31st Jan 2020 4:50 pm
View user's profile Send private message View poster's gallery Reply with quote
jules



Member Since: 13 Dec 2007
Location: The Wilds of Warwickshire
Posts: 4517

United Kingdom 2014 Freelander 2 SD4 SE Auto Firenze Red

Quite a confusing topic .

The most common alternative to copper grease is Ceratec which is sold by brake manufacturers under Mintex, Textar and Pagid brands.
Mintex claim Copper slip is poor but is rather vague as to why Ceratec is better exactly ie interferewnce with ABS systems - but how ?
https://mintex.com/copper-slip-vs-ceratec/?lang=en-gbr

I tried downloading datasheets on Ceratec - most have little useful information eg effect of rubber seals, but it seems its melting point is 1000c. The lack of definitive product information is disconcerting.

My tin of copper grease says its good for 1150c and can be used for brake parts. Effect on rubber not mentioned.
Pro and cons here ... https://www.greasemonkeydirect.com/blogs/n...e-used-for

This chap criticises Ceratec but is probably biased


Ive used copoer grease and Ceratec - not had a problem with either over many years Jules

Post #385596 31st Jan 2020 5:16 pm
View user's profile Send private message View poster's gallery Reply with quote
p_gill



Member Since: 06 Dec 2011
Location: USA
Posts: 1218

United States 2008 Freelander 2 i6 SE Auto Tambora Flame

Take a look at this link

https://www.greasemonkeydirect.com/blogs/n...e-used-for


My concern would be

DISADVANTAGES OF COPPER GREASE
Can Damage Rubber Components (o-rings, gaiters, seals)


I use a Silicone based ceramic filled lubricant for the sliding pins that pass through the rubber bushings

I won't use anything that is petroleum based if it will contact rubber parts.



Thanks

Paul

Post #385604 31st Jan 2020 6:28 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site