Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Maintenance & Modifications > Insulation engine cover - replacement
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
john capri



Member Since: 15 Nov 2015
Location: Castellammare di Stabia
Posts: 39

Italy 2010 Freelander 2 TD4 SE Manual Biscay Blue
Insulation engine cover - replacement

Hello everyone and Good Sunday.

I would like help to restore the sound insulation (also thermo ??) under the engine cover, that is the layer of sponge on a thin rubber support.

Does it exist as a replacement in LR?
Is it possible to restore it in another way?

Can someone post a photo of the under cover to see how it's done, since I found my insulation practically pulverized with some small residue on the surface of the engine? Probably the larger pieces were taken away by the mechanic at the various maintenance coupons that I did .

The car in question is obviously a Freelander 2 TD4 2010 with DPF.


Last edited by john capri on 20th Oct 2019 12:10 pm. Edited 1 time in total

Post #380036 20th Oct 2019 9:17 am
View user's profile Send private message View poster's gallery Reply with quote
Dave47



Member Since: 31 Aug 2014
Location: Margate Kent
Posts: 1277

United Kingdom 2008 Freelander 2 TD4 SE Auto Izmir Blue

Hi John,
There maybe something in this thread that could help.
https://www.freel2.com/forum/topic33026.html?highlight=insulation
Dave DAVE.
I.A.M. F1rst Driver.
Gone 2003 Discovery TD5 Auto,
Gone 1986 Defender 90 Station Wagon
Gone 1984 Range Rover 3.5 Vogue Manual.
Gone 1970 Series 11A/3 SWB 3.5 V8 Hybrid
Gone 1964 Series 11A LWB Van
Gone 1966 Series 11A SWB Van
Gone 1964 Series 11A LWB Station Wagon,

Post #380038 20th Oct 2019 10:52 am
View user's profile Send private message View poster's gallery Reply with quote
john capri



Member Since: 15 Nov 2015
Location: Castellammare di Stabia
Posts: 39

Italy 2010 Freelander 2 TD4 SE Manual Biscay Blue

Thank Dave, for your contribution.

Post #380044 20th Oct 2019 12:33 pm
View user's profile Send private message View poster's gallery Reply with quote
Grue



Member Since: 29 Apr 2018
Location: New Zealand
Posts: 331

New Zealand 2007 Freelander 2 TD4 SE Auto Sumatra Black



Almost 2 months later, no sign of heat effecting it at all. Might even put a 2nd layer in as there's room. Noticable reduction in engine noise.

Plenty of fancy expensive stuff out there that'd probably be more effective... I only used the cheap Aliexpress stuff. https://www.aliexpress.com/item/3281959889...4c4dBQMeeJ

Plenty left to do the bonnet as well which is next job

Post #380047 20th Oct 2019 6:49 pm
View user's profile Send private message View poster's gallery Reply with quote
john capri



Member Since: 15 Nov 2015
Location: Castellammare di Stabia
Posts: 39

Italy 2010 Freelander 2 TD4 SE Manual Biscay Blue

Hi Grue,

what thickness did you use to isolate the cover? Do you know up to what temperature the material can resist?

I don't know what temperature the surface of the engine can reach.

Post #380050 20th Oct 2019 7:44 pm
View user's profile Send private message View poster's gallery Reply with quote
Grue



Member Since: 29 Apr 2018
Location: New Zealand
Posts: 331

New Zealand 2007 Freelander 2 TD4 SE Auto Sumatra Black

that was 7mm thick... but will do another layer.

Seller says 107degC for maximum.... but took that with grain of salt and kept pretty close eye on it. Zero sign of breakdown, and still stuck to cover plate fine.

Post #380052 20th Oct 2019 7:51 pm
View user's profile Send private message View poster's gallery Reply with quote
john capri



Member Since: 15 Nov 2015
Location: Castellammare di Stabia
Posts: 39

Italy 2010 Freelander 2 TD4 SE Manual Biscay Blue

Do you want to add another 7mm layer by gluing it?

But is there enough space between the cover and the engine itself?

Post #380053 20th Oct 2019 8:09 pm
View user's profile Send private message View poster's gallery Reply with quote
Grue



Member Since: 29 Apr 2018
Location: New Zealand
Posts: 331

New Zealand 2007 Freelander 2 TD4 SE Auto Sumatra Black

Pretty sure there's room for another layer, but won't know till i try Smile

the material has sticky backing. peel the paper off and stick it to whatever you want

Post #380054 20th Oct 2019 9:18 pm
View user's profile Send private message View poster's gallery Reply with quote
Simon J



Member Since: 27 Jul 2019
Location: Norn Iron
Posts: 695

2008 Freelander 2 TD4 XS Auto Rimini Red

I had logged into the Forum this evening to pose exactly the same question as john capri. I removed my engine cover today for the first time to fit my EGR blanking plate and the foam insulation is well past its prime. Is it available from LR? This photo of a cover on eBay would suggest that it’s a pretty snug fit between cover and engine.

Click image to enlarge

Post #380055 20th Oct 2019 9:46 pm
View user's profile Send private message View poster's gallery Reply with quote
Lightwater



Member Since: 21 Aug 2014
Location: Sydney Northern Beaches
Posts: 4704

Ukraine 2013 Freelander 2 2.0T SE Auto Fuji White

Petrol engine & cover.


 Procrastination, mankind's greatest labour saving device!

Acoustic insulation ARB TPMS 3xARB air compressors After cooler Air tank On-board OCD pressure air/water cleaning Additional 50L fuel Carpet in doors ABE 2x1kg Waeco 28L modified fridge Battery 4x26ah Solar 120w Victron MPPT 100/20 DC-DC 18amps 175amp jumper plug Awning 6x255/60R18

Post #380057 21st Oct 2019 5:35 am
View user's profile Send private message View poster's gallery Reply with quote
john capri



Member Since: 15 Nov 2015
Location: Castellammare di Stabia
Posts: 39

Italy 2010 Freelander 2 TD4 SE Manual Biscay Blue

I have searched on the web with the hope of finding an LR spare part but I didn't find anything, but then I thought that Grue did well that he built it and certainly saved some money Thumbs Up Thumbs Up .
The realization seems easy enough.

Post #380081 21st Oct 2019 7:08 pm
View user's profile Send private message View poster's gallery Reply with quote
Simon J



Member Since: 27 Jul 2019
Location: Norn Iron
Posts: 695

2008 Freelander 2 TD4 XS Auto Rimini Red

These folks - https://www.carinsulation.co.uk/index.aspx...=GlassMAT+ - do a range of foil backed and plain foam in a range of thicknesses. Perhaps worth a try?

Post #380116 22nd Oct 2019 6:56 pm
View user's profile Send private message View poster's gallery Reply with quote
john capri



Member Since: 15 Nov 2015
Location: Castellammare di Stabia
Posts: 39

Italy 2010 Freelander 2 TD4 SE Manual Biscay Blue

On some English sites by serious dealers and known, the isolator engine cover costs about 54 Euros including taxes and excluding shipping.

Has anyone ever measured the temperatures on the top of the engine when it is hot with thermocouples or with a laser thermometer? It's necessary to avoid

For the do it yourself, you might think of using sheets made from butyl and aluminum, which have good acoustic insulation characteristics and good temperature resistance (max 150 ° - 200 °). it is necessary to prevent the insulation from burning.

Post #380117 22nd Oct 2019 7:14 pm
View user's profile Send private message View poster's gallery Reply with quote
Simon J



Member Since: 27 Jul 2019
Location: Norn Iron
Posts: 695

2008 Freelander 2 TD4 XS Auto Rimini Red

I used an IR thermometer to measure the temperature of the top of the engine with the cover off after a ten mile run and it was in the range 60 to 80 degrees, depending on exactly where the thermometer was pointing. I have just used some of the 10mm UKLiner sold by Car Insulation (see my link above) which they say is good for 130 degrees to replace the disintegrating original foam. I’ll be doing a couple of longish runs next week and I’ll take the cover off after that and see how it performed.


I’ll obviously need to add some insulation in the channels on each side. I was using the original foam as a template and hadn’t realised those areas were missing!

Post #380677 1st Nov 2019 9:06 pm
View user's profile Send private message View poster's gallery Reply with quote
john capri



Member Since: 15 Nov 2015
Location: Castellammare di Stabia
Posts: 39

Italy 2010 Freelander 2 TD4 SE Manual Biscay Blue

Hi Simon

you did a good job.

I would like to ask you some clarifications:

After you have restored the insulation with a 10mm foam sheet , You've got interference problems or difficulties when you have placed the cover over the engine?

How did you hit and drill holes in the insulation? I see them well made.

Have you noticed any improvement over the previous condition?

Let us know how it goes and keep us informed after you've tested it.


A question for everyone, on your Freel2 the original insulation was (or still is) as the first or second picture?
Obviously, you indicate the model and year of production of your Freel2.

this:

Click image to enlarge



or this:




Last edited by john capri on 2nd Nov 2019 6:21 pm. Edited 1 time in total

Post #380705 2nd Nov 2019 5:25 pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site