Hi guys,
My wife has just bought a 2008 Freelander 2 which has the HST body kit (an SE bought to tow a horse trailer, 70k, fsh). Just noticed that there is only one of the door seals - the flat flexible ones that sit below the door pressing against the sill to keep out water when wading.
On my standard bodied 07 HSE the seals are clipped to the bottom of the door facing down. On the 08 HST this single one is clipped to the inside lower edge of the added door moulding at right angles?
The door does close and I suppose it could form some kind of a seal but I don't really want to put it to the test!
SO - should the HST have these seals fitted - do they actually clip to the bottom of the door proper as per the standard non-HST, and where can I get another three?
Yes I know a picture is worth a thousand words but it is absolutely hammering it down right now!

Dan

When I bought mine the drivers door was missing and having had to remove and 'tiger seal' the passenger door cladding back on this is also missing the seal (well, its in the boot!) never had any water ingress from front doors with these seals missing