Hi all,

Go easy just got my freelander 2 last week. 2010 model.

I have an issue with the front electric memory seat. I have full working control of seat tilt, seat raise and thigh support movement but the forwards/backwards will only move approx. 1-2 inches. It sounds like the relay stops. The motor seems to be working as normal for the 1-2 inches it will move then nothing! The ecu control box circuit board looks intact and I can’t see any damage to the board, all fuses working.

Any ideas!!!??

Thanks in advance,

Get longer legs?
Sorry, welcome to the forum . . . there'll be someone along later with a sensible response

I have checked my (memory) seats and the driver's moves about 5 inches fore and aft.
Have you checked for obstructions in the rails, underneath, or alongside next to central consul.

PS please fill in details of car in your profile as it helps sorting out problems. FL2 XS SD4 Auto 2010 2012-2017 (21k - 91k miles) (MY2011)
FL2 Metropolis SD4 Auto 2014 2017- (16k - 85k+ miles) (MY2015)
Metro in its 12th Year of (Extended) LR Warranty / Full LR Service History
(Expensive, but Trouble/Worry free - hopefully?)

Sidthecat wrote:

Get longer legs?
Sorry, welcome to the forum . . . there'll be someone along later with a sensible response

Get shorter legs......  Regards

David

Lovely i6 has now gone, but not me......

Please let me know if anything in my post offends you, as I may wish to offend you again......

Does it make any “crunching” noise when going back and forth?

Mine did and seemed very slow, I cleaned the screw thread which was covered in sand (it looked like) and the seat moves easily now and I swear more movement. Regards

David

Lovely i6 has now gone, but not me......

Please let me know if anything in my post offends you, as I may wish to offend you again......