Hi lads and lasses, I want to buy a decent but not mega expensive OBD2 tool that can do all the usual stuff as well as ABS and SRS... thought I was onto a winner this morning looking at the Autel al619 (£85 ish) or md802 (£150ish)which both advertise SRS and ABS fault reading and clearing but when I looked on the vechicle data on the Autel website they only do SRS for the Freelander 1... what’s my best best for a sub £200 scanner that will work on my Freelander 2 metropolis, an i930?? They seem good value but do they work on other OBD2 cars as when googling i930 it just comes up that it’s for Jag and LR vehicles. I was hoping to invest in one so it would be at my disposal in the future rather than just for one car!

Cheers

Check out the creader 129 on ebay good bit of kit Understeer when you hit the wall with the front of the car.
Oversteer when you hit the wall with the back of the car.
Horsepower how fast you hit the wall.
Torque how far you take the wall with you.

Looks decent, have you got one? Main thing for me is that it can do the SRS on the Freelander 2. I’ve found a few now that say they can do SRS but don’t actually cover the FL2

There’s a lot of CRP129’s listed on eBay for about 100 quid less than the creader website but they look slightly different .... old version or knock off??

http://www.launchtech.co.uk/enthusiast-dia...ofessional


https://rover.ebay.com/rover/0/0/0?mpre=ht...2042253399

Just looks like it’s an older version from what I gather. Looks like a good bit of kit

Hi Yaz not used it for the srs, only used it for the abs sys and it worked fine. hope this helps Understeer when you hit the wall with the front of the car.
Oversteer when you hit the wall with the back of the car.
Horsepower how fast you hit the wall.
Torque how far you take the wall with you.

Looks like the Autel ones do actually do the airbags it’s just listed under RCM for restraint control module instead of SRS. Will have a think on what’s best to buy. I like the look of the CRP129 the most I think.