|
|
| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Maintenance & Modifications > Rear mudflaps |
|
|
|
| Largered Member Since: 10 Jul 2016 Location: UK Posts: 1978 |
are you on the correct forum ???
|
||
|
| Sidthecat Member Since: 10 Sep 2017 Location: Sarf-East London-sur-Mer Posts: 1637
|
Saw a link to these somewhere, and they're supposedly suitable for Freelanders, hence my asking |
||
|
| IDL Member Since: 25 Apr 2014 Location: Hampshire Posts: 155
|
I think you have been misinformed. Can’t see how they could possibly fit a Freelander 2 |
||
|
| bbrap Member Since: 30 Oct 2014 Location: Suffolk Posts: 272
|
I think you would need a sharp pair of scissors, a hole punch, and a cardboard template to fit those. The resulting flap may end up a little small. FL2 Metropolis, Loire Blue, ebony/ivory |
||
|
| Northcroft Member Since: 29 Jan 2017 Location: Durham Posts: 784
|
|
||
|
| j77 Member Since: 26 Nov 2008 Location: Fife Posts: 2909
|
They are a popular choice on the D3/4, very effective over the standard ones, never seen them done on a Fl2 though. 21MY Defender 90 S 3.0 D200 |
||
|
| Bobbyg Member Since: 04 Dec 2016 Location: Yorkshire Posts: 214
|
Yes I have them on mine spare from my series landy,drilled through the wheel arch liner and rear apron.just used repair washers and m6 bolts if I remember .still in place after 1 year.
|
||
|
| Bobbyg Member Since: 04 Dec 2016 Location: Yorkshire Posts: 214
|
I just looked ,I had to cut out around the exhaust.tailpipe.
|
||
|
| Sidthecat Member Since: 10 Sep 2017 Location: Sarf-East London-sur-Mer Posts: 1637
|
I thought so too, as the top edge is straight, rather than moulded, but like I say I'd see a link somewhere . . . . Looks like I'll have to go with the oem ones |
||
|
| Bibendum Member Since: 20 Oct 2015 Location: Home in Lancashire Posts: 170
|
Interesting. Any pics Rob? |
||
|
| jules Member Since: 13 Dec 2007 Location: The Wilds of Warwickshire Posts: 5553
|
IIRC You can get copies of the proper OEM mudflaps which are a lot cheaper and just as good. Rears are easy to fit . Fronts are more complicated as they need an additional metal bracket to support them. As a side point, from my experience, mudflaps are generally installed badly by dealers - with little consideration given to accuracy of position or corrosion protection. I changed all the metal screws, washers and clips to stainless where possible. Jules |
||
|
| Bobbyg Member Since: 04 Dec 2016 Location: Yorkshire Posts: 214
|
Hi most of the non genuine front flaps don't seem to supply the metal bracket.?
|
||
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis










