Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com

Home > Technical > Passenger door window operation
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Joiner_8



Member Since: 08 Feb 2007
Location: Shieldhill, Falkirk
Posts: 73

Scotland 2014 Freelander 2 SD4 HSE Lux Auto Loire Blue
Passenger door window operation

Has anybody had a problem with the one touch close operation of there passenger door window, I have just recently developed a problem with my window , IE when I use the i touch function to close the window it will close but the drops down to half way, if any of you havbe had this problem can you let me know how you managed to rectify the problem.

If I keep my finger on the close button if will close without any problem.

I await your reply. Freelander 2 SD4 hse Lux Loire Blue, side steps and roof rails fitted

Post #21345 31st May 2008 7:14 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
chicken george



Member Since: 06 Dec 2007
Location: N. Yorks
Posts: 13283

United Kingdom 2008 Freelander 2 TD4 XS Manual Santorini Black

try silicon spray on the door seals , seems the window is bouncing off the seals due to too much resistance? At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race

Post #21348 31st May 2008 8:29 pm
View user's profile Send private message View poster's gallery Reply with quote
ant



Member Since: 03 May 2008
Location: Colchester
Posts: 48

United Kingdom 2007 Freelander 2 TD4 S Manual Baltic Blue

This was happening on mine after delivery. You need to perform a window reset, about which there is a section in your handbook. It seems you have to 'teach' the window what the up and down positions are. Good luck. FL2 TD4 S Baltic Blue, with twin electrics and towbar, roofrails, luggage cover, spare wheel and mudflaps.

Post #21357 1st Jun 2008 8:03 am
View user's profile Send private message View poster's gallery Reply with quote
Matei



Member Since: 07 Feb 2008
Location: Galati
Posts: 782

Romania 2008 Freelander 2 TD4 SE Manual Izmir Blue

I was under the impression that window reset was needed only after the power was disconnected.
I did not know that this problem can apear in normal operation. FREELANDER 2 TD4 SE (XS UK) IZMIR BLUE SIDE STEPS COLD PACK BI-XENON TINTED WINDOWS - AND PROUD OF HER

Post #21361 1st Jun 2008 9:52 am
View user's profile Send private message View poster's gallery Reply with quote
John L



Member Since: 07 Jul 2007
Location: The Garden of England
Posts: 182

United Kingdom 

I had this, just some dirt in the seal. Easily sorted.
I also used some silicon spray and it worked a treat.

Post #21464 2nd Jun 2008 9:02 pm
View user's profile Send private message View poster's gallery Reply with quote
techauthorbob



Member Since: 13 Jun 2008
Location: UK, Bingley, oop north
Posts: 64

United Kingdom 2011 Freelander 2 TD4_e GS Manual Narvik Black

Just had the same fault on my rear window, this was the anti trap switch and has been replaced.

Post #22313 14th Jun 2008 6:09 pm
View user's profile Send private message View poster's gallery Send e-mail Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site