Are there anyone had trouble with electrical error? There are many error like radio and rear park sensor are shut down during driving or restart engine. I already had more than 20 times last few weeks. I alway pull radio fuse out and put it back then radio and RPS work normally. Once put fuse back, there are some mechanical noise from radio which confirmed me it working. The other one is from AC commpressor unit. everytime stop engine, i could hear electrial noise for nearly 20 second. Last week, I installed genuine FL2 none adaptive xenon headlight. It worked very fine for 3 days, then start to flashing when I start engine. But xenon work well with out starting engine.

Not yet.

Sounds like a trip to the dealers.

What trouble i had was the controls for the windows and mirror stopped working and the window was down in the rain.

A visit to the dealers got it going and think loose connection but with have to take back for a proper look and fix.

mogla wrote:

. Last week, I installed genuine FL2 none adaptive xenon headlight. It worked very fine for 3 days, then start to flashing when I start engine. But xenon work well with out starting engine.

Parts number for none adaptive xenons are LR001563, LR001576 for Australian models. Please check with your local dealer for your country models.
My dealer told me that there is some unuseal electrical circuit error especially in my car. They will check my electrical circuit with their PC on next appointment. I will update at that time. By the way, the flashing is fixed when I pull out audio unit fuse. but I can not use audio. and also rear parking sensor.

Thanks for the part numbers.
Just called my dealer. Quoted £740 inclusive of fitting and VAT!!
BUT service engineer says that ECU upgrade is necessary and may not be possible.
Your circuit error may be due to the ECU.
I am considering aftermarket HIDs now.

RW wrote:

Thanks for the part numbers.
Just called my dealer. Quoted £740 inclusive of fitting and VAT!!
BUT service engineer says that ECU upgrade is necessary and may not be possible.
Your circuit error may be due to the ECU.
I am considering aftermarket HIDs now.