![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Technical > Burning smell....clutch? |
![]() ![]() |
|
|
Andy131 Member Since: 10 Dec 2009 Location: Manchester Posts: 2198 ![]() ![]() |
just a thought
|
||
![]() |
|
pab Member Since: 28 Aug 2012 Location: Now in Mid-Wales Posts: 2007 ![]() ![]() ![]() |
One of the first things I tried after getting the FL2 - the car just stalled when it hit a slope! And that was in first, which is significantly lower than reverse. I think this is partly because the engine was cold, but then it generally is when one is leaving one's driveway, as per the OP. Basically, the anti-stall has its limits. I find that the FL2 can get up pretty much any on-road slope forwards with the clutch fully home, but reversing up can require some slip. The trick is to minimise engine revs, and thus slip, without actually allowing the thing to stall. |
||
![]() |
|
Tigerbob Member Since: 23 Dec 2012 Location: Sutton Coldfield Posts: 61 ![]() ![]() ![]() |
[quote="Boycey"]My FL2 is 2 months old and only 1500 miles.
|
||
![]() |
|
pab Member Since: 28 Aug 2012 Location: Now in Mid-Wales Posts: 2007 ![]() ![]() ![]() |
True - iirc it's close to mid way between first and second, which is far too high. I've seen it suggested that it's as high as it is because there wasn't room in the box for a larger cog! But whether that's true or just urban legend I couldn't say. |
||
![]() |
|
Rnd2 Member Since: 06 Apr 2015 Location: South wales Posts: 95 ![]() ![]() ![]() |
Good Evening everyone,today i had to reverse up a narrow uneven track ,my clutch started smelling and smoke came from under the car ,it was absolutely stinking almost like old burnt cabbage ,,car is ok 👌🏿 driving on the road slight shudder in first and second pulling away building up speed ,but i had had this for quite a long time ,the burning smell was just today |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
