|
|
| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > Maintenance & Modifications > 2010 LR2 - How do I remove rear rotors |
|
|
|
| drbeaver Member Since: 30 Mar 2013 Location: Halifax Posts: 6
|
Found pics that show that the black plug is for the hand brake shoe adjustment. Do I have to loosen the hand brake/park brake shoes to get the rotors off? |
||
|
| donny Member Since: 05 Mar 2010 Location: Usually knocking about the north Posts: 215
|
Have a look here
|
||
|
| drbeaver Member Since: 30 Mar 2013 Location: Halifax Posts: 6
|
Great, I had it to that point. Didn't think brute force was the solution. |
||
|
| Steve D Member Since: 19 Jan 2013 Location: Essexshire Posts: 4109
|
It's always the solution. |
||
|
| Eurolandy Member Since: 09 Oct 2010 Location: Cleveleys, Lancashire Posts: 285
|
Make sure the handbrake shoes are backed off all the way before trying to remove the disk (Nice to hear from someone in Halifax NS. I lived in Lower Sackville for three years). |
||
|
| drbeaver Member Since: 30 Mar 2013 Location: Halifax Posts: 6
|
I was wondering if I had to do that. How do you know how much to tighten them when you are putting them back on? |
||
|
| bambi68 Member Since: 01 Jul 2012 Location: Rotherham Posts: 261
|
There will be a topix on it , but a rule of thumb, is to adjust up till the disc/rotorwont turn then back off till the disc turns freely, do both sides then check handbrake for travel, if too much travel adjust up a tad more,
|
||
|
| drbeaver Member Since: 30 Mar 2013 Location: Halifax Posts: 6
|
Back at it today and still can't get the rotor off.
|
||
|
| Eurolandy Member Since: 09 Oct 2010 Location: Cleveleys, Lancashire Posts: 285
|
I used a metal bar between the disk (rotor) and the caliper mounting points to give a bit of leverage while pulling on the opposite side. They can be difficult to remove. |
||
|
| bambi68 Member Since: 01 Jul 2012 Location: Rotherham Posts: 261
|
It may not be the case but, there may be some threaded holes on the disc that appear to go nowhere these allow you to effectively jack the disc off . |
||
|
| drbeaver Member Since: 30 Mar 2013 Location: Halifax Posts: 6
|
Finally got it yesterday. Drivers side park brake adjuster was stuck. After some lube and a good beating it came off. Total time 5 hours or so. I had it apart twice.
|
||
|
| bambi68 Member Since: 01 Jul 2012 Location: Rotherham Posts: 261
|
Glad your sorted, |
||
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis








