![]() |
|
Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Calendar · Profile · Donate · Register · Log In |
![]() | Home > General > Auxiliary heater |
![]() ![]() |
|
|
geoff.c Member Since: 04 Feb 2011 Location: Derby East Midlands Posts: 84 ![]() ![]() ![]() |
On the spec list of all the good things my FL2 is equipped with, is an auxiliary heater. Now as i understand it, at ambient temps of 5c or less, this little diesel burner should come on and speed the warm up. I have heard of steam / smoke issuing from under the n/s/f wing or left front bumper, when the aux heater is on. The warm up on mine is quite quick, but despite pulling over when the temp gauge has barely moved, i have yet to see any "exhaust". Does anyone know for sure where the outlet is? These last few mornings have been around 0c, but i have seen nothing to prove the aux is working, or even there! |
||
![]() |
|
chicken george Member Since: 06 Dec 2007 Location: N. Yorks Posts: 13292 ![]() ![]() ![]() |
its electric a ptc heater fuel heater not available in UK, unless you have a RRS |
||
![]() |
|
taztastic Member Since: 03 Feb 2011 Location: North West Posts: 8652 ![]() ![]() |
It is equipped with an electrical auxiliary heater fitted in the heating duct, the fuel burning heater is an option.
|
||
![]() |
|
chicken george Member Since: 06 Dec 2007 Location: N. Yorks Posts: 13292 ![]() ![]() ![]() |
its auto no need to press 'prog' At work |
||
![]() |
|
The Doctor Member Since: 09 Jul 2010 Location: Gallifrey Posts: 4615 ![]() ![]() |
Interesting point about the 'prog' button. I don't press it on cold mornings I just manually control the heater settings and heated screens but it still gets warm quickly which I assume is this aux heater business cos the engine takes a few miles to warm up inevitably. LL.B (Hons) - University of Derby
|
||
![]() |
|
Pegleg Member Since: 15 Apr 2010 Location: Deep in mid Wales Posts: 3114 ![]() ![]() ![]() |
The prog buttom both activates the aux heater and moves the stepper motor in the HVAC unit to screen only. It also increases blower speed and swiches on HFS/HRW and heated mirrors. This is to save you messing about with all the other heater controls for quick demist. Another member of the failed FL2 clutch/DMF club, twice. |
||
![]() |
|
dunkley201 Member Since: 09 Jul 2011 Location: Lincolnshire Posts: 2739 ![]() ![]() ![]() |
And it works! very useful on these cold mornings - and the heated seats too! toasty! 10MY (Sept 09) TD4 HSE Auto in Stornoway Grey (Now Gone) 08 FL2 TD4 SE Manual in Rimini Red (Now Gone) |
||
![]() |
|
npinks Member Since: 28 Jun 2007 Location: Ls25 Posts: 20092 ![]() ![]() |
if you have a few minutes look at this thread for Prog button answers
|
||
![]() |
|
razmabaz Member Since: 20 Feb 2011 Location: Cambridgeshire Posts: 246 ![]() ![]() ![]() |
Freelander 1 HSE used to have it... most disconcerting if you didn't know what it was! The number of people who told me there was something wrong ... |
||
![]() |
|
geoff.c Member Since: 04 Feb 2011 Location: Derby East Midlands Posts: 84 ![]() ![]() ![]() |
ok gents, so when i remarked how quickly the engine warmed up, on 1st test drive, the salesman was probably mixed up on the equipment of different LR types. He said it had a diesel burner! Anyway, as i understand your various posts, the aux heater it has got, does not affect the coolant, but just the warmed air for the interior, yes? |
||
![]() |
|
chicken george Member Since: 06 Dec 2007 Location: N. Yorks Posts: 13292 ![]() ![]() ![]() |
yes just the cabin heat At work |
||
![]() |
|
geoff.c Member Since: 04 Feb 2011 Location: Derby East Midlands Posts: 84 ![]() ![]() ![]() |
Right, thank you CG. All has become clear. ![]() |
||
![]() |
|
alex_pescaru Member Since: 12 Mar 2009 Location: RO Posts: 4643 ![]() |
From what I've know, all big brothers (Disco, RR, RRS, etc) have FFBH (fuel fired burning heater) by default.
|
||
![]() |
|
Dave Member Since: 04 Jul 2007 Location: Somewhere Near You Posts: 2666 ![]() ![]() ![]() |
or a D4, which is far superior to a RRS ![]() |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
