Hi,

I get this tapping noise coming from the bodywork on the drivers side when driving on the motorway and i think it's coming from the trim on the drivers door at the bottom, the plastic bit. Wen i took a look at it the other day if you push it with the door open it squeeks.

How do you remove the bottom plastic panel on the drivers side? I want to take it off and just make sure it's all clipped / screwed in properly.

Apart from this annoying thing its a very cool motor. I can always turn up the stereo on the motorway but wouldn't mind getting it fixed.

Cheers,
Mike

If you talk about the exterior plastic panel, then it is clipped.
Start from one side and carefully pry it out.
It's possible that you'll damage some of the clips in the process, so be prepared.
When installing it back, make sure the clips are properly aligned with the holes when you tap it in.

Yes thats the one. Will take a look later when I get home tonight.

Thanks!

drive off road briefly, it will soon fall off At work
At home

"I can't always believe facts I read on the web" - Charles Dickens

winner by default of the tractor vs caravan race