I have been looking for instructions on how to remove the dash trim to get to the radio as I need to replace the radio front panel on my FL2 GS. There are numerous references on the forum for doing this but they all seem to lead nowhere (eg images that don't exist or URLs that point to non existent places) . Can someone please point me in the right direction ? Thanks

On the below link, 2nd to last post on page 1, no photos unfortunately.



http://www.freel2.com/forum/topic2585.html

Did the job today, there are plenty of written instructions on the various forums so it's fairly straightforward but it is difficult to remove the speaker grill and dash panel. You really have to pull hard! It's not helped by the dearth of images available so here are a couple I took during the job. I find it's always easier if you know what's behind the panel you are pulling on. basically there are 4 torx screws (you can see them in the top picture) and two under the coin tray just above the radio. Remove the gear lever gaiter as in the video
Then just start pulling!