Forum-Gallery-Shop-Sponsors

« Advertise on Freel2.com
Home > Maintenance & Modifications > Advice - New Front Disc's and Pad's
Post Reply  Down to end
Page 2 of 2 <12
Print this entire topic · 
JST



Member Since: 01 Nov 2011
Location: Lizant
Posts: 1098
France 2007 Freelander 2 TD4 HSE Manual Narvik Black

Having done the back brakes I did the front ones yesterday. At MOT in January I was told the front pads had 8,000 miles left in them. I am off to France this month so decided to do them. I wonder why LR do not fit pad wear warning wires...maybe it's just something else to go wrong but below is a pic of one of the pads I took out.

Click image to enlarge


I fitted Ford pads as I can get a good discount from where I used to work but I fitted Pagid discs from Europarts and was impressed with them. They are the type that are covered with silver paint stuff which wears off where the discs rub but leaves the other exposed parts of the disc protected.

BTW I changed the discs because they were badly corroded although the outside face looked OK. You have to take the calliper or the disc off to see what nasties are going on with the inner hidden side. John
07 HSE Narvick Black
Land Rover Series One
Triumph Rocket 111 (sadly gone!)
Post #144814 3rd Jun 2012 3:46 pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 2 of 2 <12
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
Freel2.com RSS Feed - All Forums


Switch to Mobile site