Hi, my son has a 1996 Porsche 911 993 and one of the CV joint boots/bellows/gaiters on a half shaft has perished and split. The normal fix is to remove the half shaft and replace as usual but I came across this and wondered if anyone on here has tried them?



https://www.bailcast.com/ProductCategory/index/2 3 x FL1 2 manual + 1 auto
5 x FL2 4 manual + 1 auto
Now Discovery Sport P250 MHEV SE

Not used .but seen on YouTube and I thought hmmm I would give them a go if needed

I used one on a mini Countryman and it worked really well. They have a bit more flex than the originals ones and I didn't want to use one of the ones that you glue.

The one in the video uses glue Jules

In my experience they won't last until the next MOT.
Do the job properly and do it just once. 2009 Rimini Red SE TD4. Soon to be sold.
Hyundai Ioniq 5 Ultimate on order.
Gone. 2006 Tonga Green i6 HSE.

Hi, I used a glue one on a Discovery and it was still ok after 3 yrs. Maybe I was just lucky.